Remove the |
|
hose from the | Hose |
hose clip by |
|
pulling straight |
|
out. |
|
TELESCOPIC WAND WITH SUCTION CONTROL SLIDE
Crevice
Tool
Remove the
Telescopic telescopic
Wandwand from
its storage
position.
Remove the crevice tool from its storage position in the wand. Turn the locking ring to the UNLOCK position.
Extend the wand to its full length. Turn the locking ring to the LOCK position. Attach the extension wand onto the open end of the hose.
Lower_"_ '_Suction
_ Wand_.-_..]
_Unloc_ | Upper |
| Wand |
Align the tabs on the extension wand with the "J" slots in the hose (as illustrated above right). Push the wand into the hose and twist to the right to lock.
To achieve maximum | Hose- |
reach with the attach- | |
ments, add the crevice | |
tool to the end of | suction |
the wand by | Control |
inserting and twisting slightly.
Telescopic
Wand
"Ra_ed
Toot
The dusting brush or the
combination
brush may be attached direct-
ly to the wand or placed on the end of the crevice tool.
TO OPERATE SUCTION
CONTROL SLIDE
Telescopic Wand
When using |
|
| |
attachments | for | \ | |
cleaning |
|
| Suction |
draperies, | small | Control | |
S#de | |||
rugs with | low pile |
| |
and other |
|
|
|
delicate items, |
| ||
twist the | suction |
| |
control stide | to |
|
the open
position. This slide is located on the telescopic wand, close to the hose.
This will reduce suction for ease of cleaning. Note: Return suction control slide to the closed position for normal cleaning.
When using attachments, be careful not to overextend the stretch hose when
reaching. Trying to reach beyond the hose stretch capability could cause the vacuum cleaner to tip over, Make sure the carpet/bare floor selector is in the bare floor position. Damage to the floor sur- face may occur if the carpet setting is used.
9