Kenmore 116.35622, 116.35623 owner manual Motor Protection System, clogs Unplug

Carpet edges.

Guide either side or the front of the noz- zle along a baseboard. The full length brushes help remove dirt at carpet edges. Stairs.

Put handle in full upright position. Slide the carpet/bare floor selector all the way back and down toward the bottom of the nozzle until it locks into place. Use the crevice tool or fabric brush or Handi-Mate Jr.® when

vacuum cleaner is running. Pressing the SUCTION button will cycle the vacuum motor through HIGH, MEDIUM and LOW suction levels.

For best cleaning results, keep the

airflow passage clear.

Occasionally, check each of the areas indicated for

clogs.

Unplug

um cleaner from the outlet before checking.

WARNING

Personal Injury Hazard

DO NOT place the vacuum cleaner on stairs. If it falls, personal injury or property damage could result,

MOTOR PROTECTION

SYSTEM

This vacuum cleaner is also equipped with a motor protector by-pass valve which automatically opens to provide cooling air to the motor when a clog prevents the normal flow of air to the motor, if the by- pass valve opens to prevent motor overheating and possible damage to the vacuum cleaner, you will notice a change of sound as air rushes through the valve opening.

Note: Do not block

motor protector

To correct

problem: See the

TROUBLE-

SHOOTING table. Motor

Protector

Note: The motor protector may open when using attachments or when cleaning new carpet, due to reduced airflow caused by the attachments themselves or by new

carpet lint filling the bag quickly. See the

TROUBLESHOOTING table.

11