Denon AVR-5800 operating instructions Connecting the antenna terminals, AM loop antenna assembly

Connecting the antenna terminals

F-type converter plug (attached)

•When using the FM antenna attach to this apparatus

75Ω /ohms

COAXIAL CABLE

FM INDOOR ANTENNA (Supplied)

FM ANTENNA ADAPTER (Supplied)

DIRECTION OF

BROADCASTING

STATION

FM ANTENNA

FEEDER

CABLE

300 Ω /ohms

300 Ω /ohms

TERMINALS

AM LOOP ANTENNA (Supplied)

AM OUTDOOR

ANTENNA

•An F-type FM antenna cable plug can be connected directly.

•If the FM antenna cable’s plug is not of the F-type, connect using the included antenna adapter.

AM loop antenna assembly

GROUND

FM antenna adapter assembly

		Connect to the AM
1	2	antenna terminals.
		3
	Remove the vinyl tie
	and take out the	Bend in the reverse
4	connection line.	direction.

a. With the antenna on top any stable surface.

Mount

Open the cover

PULL

CLAMP

PULL

ANTENNA ADAPTER

REMOVE

SHUT

CLAMP

b. With the antenna attached to a wall.

Installation hole

Mount on wall, etc.

CLAMP 75 Ω /ohms COAXIAL CABLE

Connection of AM antennas

1. Loosen by turning		2. Insert the		3. Tighten by turning
	counterclockwise.		cord.	clockwise.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Notes:

•Do not connect two FM antennas simultaneously.

•Even if an external AM antenna is used, do not disconnect the AM loop antenna.

•Make sure AM loop antenna lead terminals do not touch metal parts of the panel.

10