Denon AVR-5800 Power amplifier assignment function setting, Variable, 40dB, 0 dB

4 Select the desired setting, then press jog stick “ENTER”.

Variable:

The level can be adjusted freely using the buttons on the remote control unit (M. ZONE 1 4/5,

VOLUME UP and VOLUME DOWN).

-40 dB, 0 dB:

The output level is fixed at the set level and the volume can no longer be adjusted.

[2] Power amplifier assignment function setting

Make this setting to switch the power amplifier for the surround back channel to Multi-zone 2.

1 At the System Setup Menu, select “Multi Zone Control”.

2 Press jog stick “ENTER” to switch to the “Multi Zone Control” screen.

3	Select “Power Amp Assignment” then press the “ENTER” button on the jog stick.
4	Select “Surround Back” to use as the surround back
	channel, “Zone-2” to use as multi-zone 2, then press
	jog stick “ENTER”.

When “Surround Back” is selected When “M-Zone2” is selected

24