Playing the input source
1 | 3 | 5 |
2
1 |
3 |
2 |
1 | Select the input source to be played. |
Example: CD |
INPUT SELECTOR
| (Main unit) | (Remote control unit) | |||
| When the input source is selected, | CD | |||
| the input indicator lights. |
|
|
| Lit |
|
|
|
| ||
|
|
|
|
|
|
2 | Select the input mode. |
|
|
|
|
• Selecting the analog mode |
|
|
|
| |
Press the ANALOG button to switch to the analog input.
ANALOG
(Main unit) | (Remote control unit) |
•Selecting the external input (EXT. IN) mode
Press the EXT. IN (on the EXT. IN button on the remote control unit) to switch the external input.
EXT. IN
(Main unit) | (Remote control unit) |
•Selecting the AUTO, PCM and DTS modes
The mode switches as shown below each time the INPUT MODE button is pressed.
AUTO 
PCM 
DTS
(RF) 
INPUT
MODE
Input mode selection function
Different input modes can be selected for the different input sources. The selected input modes for the separate input sources are stored in the memory.
qAUTO (All auto mode)
In this mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected and the program in the
The presence or absence of digital signals is detected, the signals input to the digital input jacks are identified and decoding and playback are performed automatically in DTS, Dolby Digital or PCM (2 channel stereo) format. If no digital signal is being input, the analog input jacks are selected.
Use this mode to play Dolby Digital signals.
wPCM (exclusive PCM signal playback mode)
Decoding and playback are only performed when PCM signals are being input.
Note that noise may be generated when using this mode to play signals other than PCM signals.
eDTS (exclusive DTS signal playback mode)
Decoding and playback are only performed when DTS signals are being input.
rRF (exclusive RF signal playback mode)
This can only be selected when the program source is set to VDP. Decording and playback are only performed when RF signals are being input. This is used when the LD player has an Dolby Digital- RF
tANALOG (exclusive analog audio signal playback mode)
The signals input to the analog input jacks are decoded and played.
yEXT. IN (external decoder input jack selection mode)
The signals being input to the external decoder input jacks are played without passing through the surround circuitry.
NOTE:
•Note that noise will be output when CDs or LDs recorded in DTS format are played in the “PCM” or “ANALOG” mode. Select the “DTS” mode when playing signals recorded in DTS from a laser disc player or CD player.
Note on playing a source encorded with DTS
•Noise may be generated at the beginning of playback and while searching during DTS playback in the AUTO mode. If so, play in the DTS mode.
(Main unit) | (Remote control unit) |
33
