Denon AVR-5800 operating instructions After completing system setup, On-screendisplay signals

2

3

Switch to the Auto Preset Memory screen.

Select “Yes” for Start.

“Search” flashes on the screen and searching begins. “Completed” appears once searching is completed. The display automatically switches to screen.

This completes system setup. Once these settings are made, there is no need to change them unless different AV components are connected or the speakers are repositioned.

After completing system setup

This button can be pressed at any time during the system setup process to complete the process.

1

At the System Setup Menu, press the SYSTEM SETUP button.

The changed settings are entered and the on-screen display turns off.

Finally set the remote control unit (RC-8000) display time setting to a time that is short but long enough that operation is possible.

• On-screen display signals

		Signals input to the AVR-5800		On-screen display signal output
	VIDEO signal input jack (yellow)		S-video signal input jack	VIDEO MONITOR OUT-1 video	S-video MONITOR OUT-1 video
				signal output jack (yellow)	signal output jack
1	E		E	C	C
2	C		E	C	E
3	E		C	E	C
4	C		C	E	C
(C: Signal	E: No signal)
(C: On-screen signals output		E: On-screen signals not output)

NOTES:

•The on-screen display signals are not output from the video signal MONITOR OUT-2 (yellow) or S-Video signal MONITOR OUT-2 jacks.

•The on-screen display signals are not output from the color difference (component) video signal MONITOR OUT jacks.

•For 4 above, the on-screen display signals are output to the VIDEO MONITOR OUT-1 video signal output jack (yellow) if the monitor TV is not connected to the S-video MONITOR OUT-1 video signal output jack.

30