Remote Control Unit, Using the remote control unit | Denon AVR-5800

8REMOTE CONTROL UNIT

•The included remote control unit (RC-8000) can be used to operate not only the AVR-5800 but other remote control compatible DENON components as well. Furthermore, it is equipped with a function for learning the control signals of remote control units of other manufacturers, so it can also be used to operate non-DENON remote control compatible video components.

•For details, refer to the separate (supplied) RC-8000 operating instructions.

Using the remote control unit

30°

30°

Approx. 7 m/22 feet

•Point the remote control unit at the remote sensor on the main unit as shown on the diagram.

•The remote control unit can be used from a straight distance of approximately 7 meters/22 feet from the main unit, but this distance will be shorter if there are obstacles in the way or if the remote control unit is not pointed directly at the remote sensor.

•The remote control unit can be operated at a horizontal angle of up to 30 degrees with respect to the remote sensor.

NOTES:

•It may be difficult to operate the remote control unit if the remote sensor is exposed to direct sunlight or strong artificial light.

•Do not press buttons on the main unit and remote control unit simultaneously. Doing so may result in malfunction.

•Neon signs or other devices emitting pulse-type noise nearby may result in malfunction, so keep the set as far away from such devices as possible.

31

Image 31

Denon AVR-5800 operating instructions Remote Control Unit, Using the remote control unit

Contents

AVR-5800 Safety Precautions Safety Instructions Before Using Table of Contents Features Connections Connecting the audio components TV/DBS Connecting video components Precaution when using S-jacks Connecting a video component equipped with S-Video jacks Connecting a DVD player DVD in jacks FM antenna adapter assembly Connecting the antenna terminals Connecting the Multi Source jacks Connecting the external input EXT. in jacks Speaker system connections Connecting the speaker cordsSpeaker Impedance Surround Speaker Systems a Connections Front Panel Part Names and Functions Remote control unit Mute Setting UP the System Surround speaker selector function Speaker system layout 6, 7 Before setting up the system Setting the type of speakers Parameters Setting the Subwoofer mode THX surround EX/DTS ES Auto Flag Detect Mode Afdm setting Setting the Surround Back channelAssignment of low frequency signal range Subwoofer mode Preparations Setting the delay time Setting the multi-zone 1 level Setting the Multi Zone Control 40 dB, 0 dB Variable Setting the channel level Channel Level screen reappears Subwoofer peak limit level setting Setting the Digital In Assignment Auto tuner presets Setting the on-screen display OSD On-screen display signals After completing system setup Using the remote control unit Remote Control Unit Operation Operating the remote control unitBefore operating Playing the input source Input mode selection functionExample CD After starting playback Adjusting the sound quality toneExample Stereo Turning the sound off temporarily muting Listening over headphonesSwitching the surround speakers Checking the currently playing program source, etc Multi-source recording/playback Playing one source while recording another REC OUT modeRecording Dolby Digital and DTS multichannel sources Press the M-ZONE 1 button PRE OUT EFFECT/SB left and right jacks Playback using the external input EXT. in jacks Playing audio sources CDs and DVDs Pure Direct modeDirect mode Stereo mode Multi-source and multi-zone playback Multi-zone playback using the Multi Zone 1 terminals Remote Control Unit Multi-zone playback using the Multi Zone 2 terminals Before playing with the surround function Surround Fader function Remote Control Unit Playing modes for different sources Surround parameters q Afdm Auto Flag Detect Mode THX Surround EX / Home THX Cinema mode Select the Surround mode Set the input mode to Auto DTS Neo6 mode Dolby Surround Pro Logic mode Denon Original Surround Modes Surround modes and their featuresPersonal Memory Plus DSP surround simulation Select the surround mode for the input channel Tone control setting Surround modes and parameters Surround parameters e Manual tuning Auto tuningListening to the Radio Main unit Preset memoryChecking the preset stations Remote control unit Last Function Memory Recalling preset stationsInitialization of the Microprocessor Troubleshooting Movie audio Types of multi-channel signalsAdditional Information Optimum surround sound for different sources Number of surround back speakers Surround back speakers Speaker setting examples When not using surround back speakers When using different surround speakers for movies and music Dolby Digital compatible media and playback methods SurroundDolby Surround Dolby Digital Dolby Surround AC-3 2Dolby Digital and Dolby Pro Logic DTS compatible media and playback methods DTS Digital SurroundDolby Pro Logic Dolby Pro Logic compatible media and playback methods DTS-ES Extended Surround TM THX Surround EX Home THX Cinema surround mode THX Surround modes and parameters Audio section Specifications 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan