MAIN UNIT:
3 Turn the CONTROL knob to adjust the level of the selected speaker.
(Main unit)
REMOTE CONTROL UNIT:
Move jog stick “ENTER” back and forth to adjust the level of the selected speaker.
(Remote control unit)
REMOTE CONTROL UNIT:
4 Once the channel level adjustment is completed, press the CURSOR/PAGE button again so that the display is no longer highlighted, then press the CH. SELECT button.
(Remote control unit)
When the surround back speaker setting is set to “1spkr” for “Speaker Configuration”, this is set to “SB”.
In the EXT IN mode, “SBR” is set to “ER”, “SBL” to “EL”.
Fader function
•This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together. Use it for example to adjust the balance of the sound from the different positions when playing
1 | MAIN UNIT: |
Select “FADER” using the FUNCTION | |
knob after selecting “CH. VOL” with | |
| the MODE SELECT button. |
REMOTE CONTROL UNIT:
Select “FADER”.
FUNCTION
(Main unit)
|
|
|
|
| (Remote control unit) |
FL | C | FR | SR | SBR | SBL |
| FADER |
| SW | SL |
|
2 |
MAIN UNIT:
2 Turn the CONTROL knob clockwise to adjust the volume of the surround side collectively. Turn the CONTROL knob counterclockwise to adjust the volume of the front side collectively.
REMOTE CONTROL UNIT:
Move jog stick “ENTER” to the top side to adjust the volume of the surround side collectively.
Move jog stick “ENTER” to the bottom side to adjust the volume of the front side collectively.
2
(Main unit)
(Remote control unit)
1 |
The fader function does not affect the SW, EL and ER channels.
The channel whose channel level is adjusted lowest can be faded to
If the channel levels are adjusted separately after adjusting the fader, the fader adjustment values are cleared, so adjust the fader again.
This is only displayed when setting the fader control.
43
