Denon AVR-5800 Playing audio sources CDs and DVDs, Pure Direct mode, Stereo mode

Playing audio sources (CDs and DVDs)

The AVR-5800 is equipped with three 2-channel playback modes exclusively for music.

Select the mode to suit your tastes.

1	PURE DIRECT mode	1
	In this mode, the music is played with an extremely high level
	of sound quality.
	When this mode is set, all the video-related circuits are turned
	off so that music signals can be reproduced with high quality.
	When an analog input (phono, etc.) is selected, the digital
	processing circuitry is also turned off to achieve analog sound
	with even higher purity.

(Main unit) (Remote control unit)

DIRECT mode

2 Use this mode to achieve good quality 2-channel sound while watching images. In this mode, the audio signals bypass such circuits as the tone circuit and are transmitted directly, resulting in good quality sound.

(Main unit) (Remote control unit)

STEREO mode

3 Use this mode to adjust the tone and achieve the desired sound while watching images.

STEREO

(Main unit) (Remote control unit)

VIDEO ON/OFF button

4 When no video signals of a DVD, etc., are connected to the AVR-5800 and the DVD, etc., are connected directly to a TV, etc., the unneeded video circuitry can be turned off by selecting the “VIDEO OFF” setting.

(Main unit)

NOTES:

•The system setup function cannot be used when the PURE DIRECT mode is set or the “VIDEO OFF” setting is selected. To use the system setup function, cancel the PURE DIRECT mode or select the “VIDEO ON” setting.

•The multi-room video output is not output in the PURE DIRECT and VIDEO OFF modes.

•The channel level and surround parameters in the PURE DIRECT mode are the same as in the DIRECT mode.

•When the PURE DIRECT button is pressed while in the PURE DIRECT mode, the PURE DIRECT mode is canceled and the DIRECT mode is set.

The PURE DIRECT mode can also be canceled by turning the INPUT SELECTOR knob or pressing another surround mode button.

2	3	4
		1
		2
		3

39