Denon AVR-5800 When using the PRE OUT terminals, 2When using the M-ZONE2 MULTI speaker terminals

[2]Multi-zone playback using the MULTI ZONE 2 terminals

The AVR-5800 is equipped with audio pre output terminals with a fixed output level (M-ZONE 2) as the MULTI ZONE 2 output terminals. (These are not video outputs.)

Settings can be made at the system setup menu so that the same source as the M-ZONE 2 pre-out terminals can be played from the speakers connected to the M-ZONE 2 speaker terminals.

2 When using the PRE OUT terminals

2When using the M-ZONE 2 (MULTI) speaker terminals

ANOTHER ROOM MAIN ROOM

AVR-5800

RC-8000RC-8001ST

NOTE:

When the main unit is set to the recording output mode, the M-ZONE 2 remote control unit key cannot be operated. (See page 36.)

[3]When using a separately sold room-to-room remote control unit (RC-616, 617 or 618)

When the main room and another room are far apart and operation is not possible with RF transmission, operation is possible using a separately sold room-to-room remote control unit (RC-616, 617 or 618).

For details, refer to the operating instructions of the RC-616, 617 or 618.

ANOTHER ROOM MAIN ROOM

RC-617

INTEGRATED

AMPLIFIER

AVR-5800

REMOTE

CONTROL UNIT

	REMOTE
RC-616	CONTROL UNIT

ROOM-TO-ROOM REMOTE CONTROL SYSTEM (separately sold) control line

MULTI SOURCE AUDIO signal cable

SPEAKER cable

41