Assembly Instructions
A
C | grassbox lid |
lower
handle 
fixing
pins
D | handle | bolt |
knob | ||
| 1 | 2 |
|
| |
|
| washer |
B |
Assembly of Lower Handles to Deck
1.Insert lower handle into holes in the deck (A).
2.Release the grassbox catch and lift the grassbox lid (B).
3.Rest the grassbox lid against the lower handle and remove the grassbox.
4.Push the lower handle into place ensuring that the holes in the lower handle are correctly located behind the holes in the deck.
5.Secure the lower handles to the inside of the deck with the lower handle fixing pins (C).
6.Ensure the fixing pins are securely located.
7.Should a problem occur when securing lower handle to deck, carefully lever fixing pins out of location and repeat steps 4 to 6 above.
8.Replace the grassbox and close the grassbox lid.
Assembly of Upper Handles to Lower Handles.
• Ensure the upper handle is located correctly with the
1.Insert the nut into the handle knob (D1).
2.Ensure the upper handle and the lower handle are aligned correctly. (D2)
3.Fit the bolts, washers and handle knobs.(D)
4.Fit the cable to the handles with the clips provid- ed. Make sure the cable is not trapped between the upper and lower handles.
Cutting Height Adjustment
E
Adjusting the cutting height
1.Lift the lever out of location and rotate to the desired position. (E)
Heights of cut:-
1 & 2 - low, 3 - medium, 4 & 5 - high
