Removing and Fitting the Blade and Fan Q, R1R2

Removing and Fitting the Blade and Fan (Q)

Always handle the blade with care - sharp edges could cause injury. USE GLOVES.

Removing the Blade and Fan

1.To remove the blade bolt, hold the fan firmly and, with the spanner provided, loosen the blade bolt by turning it anti-clockwise.

2.Remove the blade bolt, blade and fan from the pulley.

3.Inspect for damage and clean as necessary.

Renew your metal blade after 50 hours mowing or

2years whichever is the sooner - regardless of condition. If the blade is cracked or damaged replace it with a new one.

Fitting the Blade and Fan

1.Ensure the fan is located correctly.

2.Fit the blade to the fan.

3Re-assemble blade bolt through blade and fan.

4.Hold the fan and tighten blade bolt firmly with the spanner provided. Do not over tighten.

Storing your cable in the Easi-Reel cable winder 1. Insert the femaleconnector into the top of the

cable winder (R1)

2. Place the cable under the cable guide (R2)

3. Turn the cable winder (R3) until all of the cable is wound in.(R4)

Unwinding the cable before re-use

1.Pull the cable by the plug and unwind the cable fully.

•Ensure that the cable is released from the cable guide (R2) before using your machine.