Starting and Stopping
K | L |
| M |
N | P |
| 1 |
• Important:- Your lawnmower will not start until the grassbox lid is firmly closed and clicked into place.
To Start your Lawnmower
1.Connect female extension cable connector to the back of the switchbox. (K)
2.Form loop in mains cable and push the loop through the slot as illustrated in picture (L)
3.To secure, position loop over the hook and pull the cable back through the slot as illustrated in picture (M).
4.Connect plug to mains and switch on.
5.Tilt the handle downwards to slightly raise the front of the lawnmower and to reduce the risk of lawn damage whilst starting.
The switchbox is provided with a
6.Press and hold the
7.Continue to squeeze the start/stop lever towards the upper handle and release the
8.Lower the lawnmower to its proper operating posi- tion and commence mowing.
•NOTE:There are two start/stop levers fitted. Either one can be used for starting the lawnmower.
•IMPORTANT: Do not use the start/stop levers intermittently
To Stop your Lawnmower
1.Release the pressure on the Start/Stop lever.
How to Mow
1.Start mowing the edge of the lawn nearest to the power point so the cable is laid out on the lawn you have already cut.
2.Mow twice a week during the growing season, your lawn will suffer if more than a third of its length is cut at one time and this may also result in poor collection.
Do Not Overload Your Mower: Mowing long thick grass may cause the motor speed to drop, you will hear a change in the motor sound. If the motor speed drops you may overload your lawnmower which may cause damage. When mowing in long thick grass a first cut with the cutting height set higher will help reduce the load. See Cutting Height Adjustment.
