Assembly

Figure 5

Figure 6

5.First, Seat Frame(40) onto the Rail Tube(13), pull the Pulse Wires(52) in the Seat Frame(40) and Pulse Wires(53) in the Rail Tube(13) out of the square on the bottom of the Seat Frame(40). Next, connect the Pulse Wires(52) to Pulse Wires(53) as shown in Figure 5. After the pulse wires are connected place them inside the square in the bottom of the Seat Frame(40). Secure the iron plate with four Screws(51). Last, adjust the Seat Frame(40) at the desired position and fix it with the Locking Knob(46).

6.Place the Rail Tube(13) on to the Main Frame(1) and secure in place with four Screws(12) and four Washers(10).