Rear Shock Setup, SJ 130 Rear Air Shock Setup

REAR SHOCK SETUP

SJ 130 Rear Air Shock Setup

Fox Stumpjumper FSR Brain Fade

Sag Setting: Set the sag (20-25% of shock stroke). See attached pressure chart for starting air pressure.

Note - the chart is only a starting point, actual sag needs to the checked and adjusted on the bike, while riding, and at regular intervals. After setting the pressure, push the rubber ring up to the seal, sit on the bike gently, dismount, and measure sag.

Set Standard rebound damping adjuster to rider preference. Typically a slower rebound for slow speed, bigger hits to eliminate kickback, or faster rebound for higher speeds and smaller hits, so the suspension does not dive and has time to rebound between bumps

Fox Stumpjumper FSR Brain Fade ride tips: Stumpjumper Brain Fade controls the Trail Tune inertia valve damping. The blue knob adjusts Trail Tune damping from firm (clockwise) to soft (counterclockwise) and does NOT completely lock out the shock (ie. Epic).

Rider		Brain Fade
lbs	kg	air (psi)
90-100	41-45	70-80
100-110	45-50	80-90
110-120	50-54	90-100
120-130	54-59	100-110
130-140	59-64	110-120
140-150	64-68	120-130
150-160	68-73	130-140
160-170	73-77	140-150
170-180	77-82	150-160
180-190	82-86	160- 170
190-200	86-91	170-180
200-210	91-95	180-190
210-220	95-100	190-200
220-230	100-104	200-210
230-240	104-109	210-220
240-250	109-113	220-230
250-265	113-120	230-240
265-280	120-127	240-250
280-295	127-134	250-260

NOTE: This air chart is designed as a recommended starting point only. Please refer to your shock owner’s manual for additonal setup information.