1. First
NOTE: We strongly urge you to read this Manual in its entirety before your fi rst ride; but at the very least, read and make sure that you understand each point in this section, and refer to the cited sections on any issue which you don’t completely understand. Please note that not all bicycles have all of the features described in this manual. Ask your dealer to point out the features of your bicycle that are covered in this manual.
A.Bike fi t
1.Is your bike the right size? To check, see Section 3.A. If your bicycle is too large or too small for you, you may lose control and fall. If your new bike is not the right size, ask your dealer to exchange it before you ride it.
2.Is the saddle at the right height? To check, see Section 3.B. If you adjust your saddle height, make sure that you follow the Minimum Insertion instructions in Section 3.B.
3.Are saddle and seatpost securely clamped? A correctly tightened saddle will allow no saddle movement in any direction. See Section 3.B for details.
4.Are the stem and handlebars at the right height for you? If not, see Section 3.C on what you can do about it.
6.Can you comfortably operate the brakes? If not, you may be able to adjust their angle and reach. See Section 3.D and 3.E for details.
7.Do you fully understand how to operate your new bicycle? If not, before you ride, have your dealer explain any functions or features which you do not understand.
B.Safety fi rst
1.Always wear an approved helmet when riding your bike, and follow the helmet manufacturer’s instructions for fi t, use
and care of your helmet.
2.Do you have all the other required and recommended safety equipment? See Section 2. It’s your responsibility to familiarize yourself with the laws of the areas where you ride, and to comply with all applicable laws.
3.If your bike has wheel quick releases, do you know how to correctly operate them? Check Section Appendix B to make sure. Riding with an improperly adjusted wheel quick release can cause the wheel to wobble or disengage from the bicycle, and cause serious injury or death.
4.If your bike has clipless
5.Does your bike have suspension? If so, check Section 4.F. Suspension can change the way a bicycle performs. Follow the suspension manufacturer’s instructions for use, adjustment and care.
6.Do you have “toe overlap”? On smaller framed bicycles your toe may be able to contact the front wheel when a pedal is all the way forward and the wheel is turned.
See section 4.C.1.
C.Mechanical Safety Check
Routinely check the condition of your bicycle before every ride.
Nuts, bolts & straps: Make sure nothing is loose. Lift the front wheel off the ground by two or three inches, then let it bounce on the ground. Anything sound, feel or look loose? Do a quick visual and tactile inspection of the whole bike. Any loose parts or accessories? If so, secure them. If you’re not sure, ask someone with experience to check.
4