We recommend against this type of riding because of the increased risks; but if you ignore this recommendation, at least:
•Take lessons from a competent instructor fi rst
•Do stunts, racing or fast downhill riding only in areas designated for this type of riding
•Start with easy learning exercises and slowly develop your skills before trying more dangerous riding
•Wear a full face helmet, safety pads, and other safety gear
•Make sure by checking with your dealer that your bike is suitable for the kind of stunt or competition riding you plan to do
•Understand and recognize that the stresses imposed on your bike by this kind of activity may break or damage parts of the bicycle and void the warranty
•Take your bicycle to your dealer if anything breaks or bends. Do not ride your bicycle when any part is damaged.
If you ride downhill at speed, do stunt riding or ride in competition, you voluntarily assume an increased risk of injury or death. Have your bicycle and equipment carefully inspected by a qualifi ed mechanic and be sure it is in perfect condition. Consult with expert riders and race offi cials on conditions and equipment advisable at the site where you plan to ride. Wear appropriate safety gear, including an approved full face helmet, full fi nger gloves, and body armor. Know the limits of your skill and experience. Ultimately, avoiding injury is your responsibility.
H.Changing Components or Adding Accessories
There are many components and accessories available
to enhance the comfort, performance and appearance of your bicycle. However, if you change components or
add accessories, you do so at your own risk. The bicycle’s manufacturer may not have tested that component or accessory for compatibility, reliability or safety on your bicycle. Before installing any component or accessory, including a different size tire, make sure that it is compatible with your bicycle by checking with your dealer. Be sure to read, understand and follow the instructions that accompany the products you purchase for your bicycle.
!WARNING: Failure to confi rm compatibility, properly install, operate and maintain any component or accessory can result in serious injury or death.
!CAUTION: Changing the components on your bike may void the warranty. Refer to your warranty, and check with your dealer before changing the components on your bike.
3. Fit
NOTE: Correct fi t is an essential element of bicycling safety, performance and comfort. Making the adjustments to your bicycle which result in correct fi t for your body and riding conditions requires experience, skill and special tools. Always have your dealer make the adjustments on your bicycle; or, if you have the experience, skill and tools, have your dealer check your work before riding.
Make sure the bike fi ts. A bike that’s too big or too small is harder to control and can be uncomfortable.
10