Assembly
.354"
5
•Fit the cap nut on the end of the straight axle.
•Tap the cap nut with a hammer. Gently pull the rear wheel to be sure the cap nut is securely attached to the straight axle.
Hint: You may need the help of another adult to hold the other end of the straight axle in place.
Pedal Axle Tab | Pedal Hub |
7 | Pedal Hub |
|
•Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit into the slot in each pedal hub.
•While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel.
•Press the pedal hubs into the center of the front wheel until they are fl ush with the surface of the front wheel.
•Repeat this procedure on the other side with the other two pedal hubs.
Fork Arms
Front Wheel
Assembly
Groove
Fork Cover
8
Pedal Axle
Wheel Hub
6 | Wheel Cap |
|
•Fit the tabs on the wheel cap into the slots in the wheel hub. Push to "snap" the wheel cap in place.
•Repeat this procedure to attach the other wheel cap to the other wheel hub.
•Place the front wheel assembly between the fork arms. Make sure the pedal axle fits into the groove at the bottom of each fork arm.
•Place a fork cover over the pedal axle on one fork arm.
•Insert two #8 x ¾" screws into the fork cover and tighten.
•Repeat this procedure to attach the other fork cover to the other fork arm.
4