PYLE Audio PFTL31404.1 user manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches and your own phillips screwdriver,

adjustable wrench , wire cutters , and needlenose pliers . For help identifying the assembly hardware, refer to the PART IDENTIFICATION CHART below.

1/2” Screw (73)–6

3/4” Screw (2)–6

1/2” Ground Screw

 

 

 

(75)–1

Wheel Nut (13)–2

 

 

 

1” Tek Screw (39)–6

 

 

 

Wheel Bolt (64)–2

Washer (45)–6

Star Washer

 

(63)–2

Handrail Bolt (27)–2

 

 

 

 

 

2 1/4” Bolt (35)–2

3” Bolt (37)–6

 

 

 

1. Make sure that the power cord is unplugged.

1

 

86

 

 

With the help of a second person, carefully tip the tread-

 

 

 

 

mill onto its left side as shown. Partially fold the Frame

 

 

 

57

 

(86) so that the treadmill is more stable. Do not fully

39

61

 

64

fold the treadmill until it is completely assembled.

 

 

Attach two Round Base Pads (57) (only one shown) and

 

 

 

 

 

two Base Pads (61) to the bottom of the Base (69) with

 

69

 

 

66

six 1” Tek Screws (39) (only five are shown).

 

39

 

Attach a Wheel (66) to the Base (69) with a Wheel Bolt

 

 

 

32

(64) and a Nut (32) as shown. Do not overtighten the

 

 

 

 

 

Nut; the Wheel should turn freely.

61

 

 

 

 

 

 

 

 

 

6

39

 

 

 

 

 

 

 

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents
QUESTIONS? Model No. PFTL31404.1 Serial NoTable of Contents Important Precautions Page Before YOU Begin Right SideBack Assembly Make sure that the power cord is unpluggedFold the treadmill until it is completely assembled Right Upright be careful not to damage the Upright Wire Pinch the Upright Wire. Firmly tighten the BoltsBolts 37. Firmly tighten the Bolts Small Hole Do not overtighten the Screws Top ViewOperation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Insert the key into the consoleChange the incline of the treadmill as desired Measure your heart rate if desired When you are finished exercising, remove the keyFollow your progress with the track and the displays Turn on the fan if desiredHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Key and Unplug the Power Cord . Using Problem The walking belt slows when walked onUnplug the Power CORD. If the walking Belt has shifted to the left, use the allen wrench toWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page Key Qty Description Qty DescriptionExploded DRAWING-Model No. PFTL31404.1 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT
Related manuals
Manual 22 pages 14.49 Kb