25. Check leveling at this time. Pole should be level in all directions. NOTE: If adjustment is necessary, adjust system by rotating the nuts (2) between mounting plate (3) and pole flange. (Refered to in Step 6.) After system is leveled, completely tighten nuts (7) above pole flange.
| 26. Crank to achieve a rim height of 7’ (2.13 m) from the |
| |
| ground. Place a mark on pole at the point where the |
| |
| lower support arms intersect pole. Center and apply |
| |
| the 7’ (2.13 m) height line on label (35) on the mark |
| |
| and wrap around. View height indicator label to |
| |
35 | determine approximate backboard height. |
| |
|
|
| |
| 27. | Apply height adjustment |
|
|
| label (37) to front of pole |
|
|
| as shown. |
|
|
| 37 |
|
|
| REGULATION | |
|
| RIM HEIGHT IS | |
|
| 10 FEET (3.05 m). | |
|
|
| 10 feet |
|
|
| (3.05 m) |
| 15 | 01/03 | P/N 211560H |