SECTION C: APPLY HEIGHT AND MOVING LABEL & HEIGHT ADJUSTMENT
1.Apply height adjustment and moving label (54) to front of pole as shown.
10 ft. | 54 |
(3.05 m)
WARNING!
TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
NOTE:
Peel protective film from
surface of acrylic
backboard prior to use.
2.A. While holding handle, remove pin (26).
B.Move elevator up or down to desired height.
C.Replace pin (26) full length to lock system at desired height.
28
B.
26
A.
C.
WARNING!
DO NOT ALLOW CHILDREN TO ADJUST HEIGHT.
P/N 211636C 07/03 | 26 |