SECTION C: APPLY HEIGHT AND MOVING LABEL & HEIGHT ADJUSTMENT
1.Apply height adjustment and moving label (46) to front of pole as shown.
10 ft. | 46 |
(3.05 m)
WARNING!
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
NOTE:
Peel protective
film from surface
of acrylic
backboard prior
to use.
2.A. While holding handle, remove pin (24).
B.Move elevator up or down to desired height.
C.Replace pin (24) full length to lock system at desired height.
24
A.
C.
B.
WARNING!
DO NOT ALLOW
CHILDREN TO
ADJUST HEIGHT.
25 | 07/05 | ID# M671111 |