4. Install rod (7) through holes in bottom pole section (6) and eyebolt (8).
8
6
7
Install wheel axle (2) through wheel carriage (19) and install wheels (3) onto wheel axle (2) with
5. spacers (17) as shown. Insert pole assembly into tank assembly as shown. Secure bottom pole (6) section to tank and wheel carriage as shown. A deep socket is recommended.
IMPORTANT!
THE SPACER (17) WILL FIT LOOSELY UNTIL SECURED INTO THE CAVITY OF THE BASE.
IMPORTANT! |
DO NOT OVER |
TIGHTEN |
1
IMPORTANT! |
The Warning Label |
should be facing |
towards the front. |
WARNING!
TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.
6 |
7 |
8 |
9 |
17 | 2 | 19 |
| ||
|
|
3
3 | 17 |
ID# M731321 | 11/05 | 12 |