6.Install wheel axle (2) through wheel carriage (9). Install wheels (3) onto wheel axle (2) with spacers (28) as shown. Insert pole assembly into tank assembly
as shown. Secure bottom pole (6) to tank and wheel bracket as shown.
A deep socket is recommended. | IMPORTANT!: |
|
DO NOT OVER
TIGHTEN
| 9 |
28 | 3 |
| |
| 6 |
| 28 |
2 | 3 |
|
IMPORTANT!: | 7 |
| |
WARNING! | 8 |
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
THE SPACER (28) WILL | 10 | |
FIT LOOSELY UNTIL | ||
| ||
SECURED INTO THE |
| |
CAVITY OF THE BASE. |
|
7.Secure tank struts (13) to pole. Rotate
WARNING!
TIGHTEN BOLT (11) IN
LOCK NUT (12) UNTIL
FLUSH (EVEN) WITH LOCK
NUT’S OUTER EDGE.
11
12
12
14 |
13
1
13
11 | 10/03 | P/N 214994C |