1.Remove contents from tank
1
2.Correctly identify each pole section and mark indicated distance from ends with tape (not supplied) as shown.
TAPE (Not Supplied)
5”
(13 cm)
TOP
MIDDLE
BOTTOM
4
5
6
5”
(13 cm)
3.IMPORTANT! Center the alignment slot of middle pole section (5) in the lower hole of top pole section (4) as shown. While maintaining alignment, bounce middle section of pole (5) into top section of pole (4) using wood scrap as shown until they no longer move toward taped reference mark.
NOTE: |
|
POLE SECTIONS |
|
SHOULD HAVE A | 5 |
| |
OVERLAP. |
|
4
WOOD SCRAP 
(NOT SUPPLIED)
9 | 10/03 | P/N 214994C |