Assembly is easier with two people.This is a large product and somepatE are heavy. Assemble the system where you want it to stay: do not assemble the entire product and attempt to move it across a room or from one room to another. For instructions on disassembly, see p. 9.
Assembling the Backboard and Rim first will make overall assembly easier.When the rest of the product is assembled, you can attach this completed part to the top.
FIUING 7HE TANKS
TwoTanks anchor the system in place. Fill theTanks with water: do not fill with sand, gravel, o r any other material o r liquid.
The Tanks do not have a fill line: fill until full. EachTank holds approximately five gallons of water and, when full, weighs approximately 42 pounds.
It is recommended that you fill the Tanks near where you want the
system to be, so you do not haw to cany thr
Tank far.
Fill the Tank ebiw bC'
ma
fiHng
o r
Bringing a pitcher o r water container to the Tanks and filling.
Whichever approach you
take, be sure the Tank is flat when being filled and that the Tank Cap is secure before you move theTank.
Each Tank has a handle at one end and a grip at the other end. If you do not have a second person t o help lift and carry the Tanks, be careful: the Tanks are heavy.