Hoist Fitness CL-2407 owner manual 8-16 x 2 3/4 Button Head Screw White Zinc

A SS E M B LY

I N S T R U C T I O N S

Step 2d

F R A M E A S S E M B L Y

In this step, start by pressing (29) into (2). Place a (28) over the two holes in the bottom of (2). Now slide (31) into the holes. Slide (27) and the (26) onto (31). Make sure (26) and (27) and (31) are sitting level, then fasten the top of each (31) to (2). Next attach (23) to (22). Secure (22) to (26), slide on (24) and attach another (23) to the (2). Attach bigger end of the (CL) to (22), and the other end to (25). Then Wrench tighten bolts.

Part Descriptions		Hardware Descriptions
2 - Weight Cage		F - 3/8”-16 x 1” Button Head Screw (White Zinc)
22	- Center RH (BRK) Assembly	H - 3/8”-16 x 1” Button Head Screw (Black Zinc)
23	- Add On Rods	J - 3/8”-16 x 2 3/4” Button Head Screw (White Zinc)
24	- 5lbs. Add On Weight	K - 5/16”-18 x 1” Button Head Screw (Black Zinc)
25	- Weight Selector Pin	AE - 3/8” Flat Washer (White Zinc)
26	- 20lbs. Steel Weight Plate	AF - 3/8” Lock Washer (White Zinc)
27	- 20lbs. Intermediate Weight Plates	AG - 5/16” Flat Washer (Black Zinc)
28	- Weight Bumper	AH - 5/16” Lock Washer (Black Zinc)
29	- Guide Rod Bushing	AJ - 3/8” Split Washer (White Zinc)
31	- Guide Rods	AK - 3/8” Lock Washer (Black Zinc)
		AL - 3/8” Flat Washer (Black Zinc)

CD - Top Weight Roll Pin

CE - Guide Bearing (Tall)

CF - Guide Bearing (Short)

CL - Selector Pin Lanyard

Page 11

HOIST

FITNESS SYSTEMS

R

2407 Assembly