A SS E M B LY
I N S T R U C T I O N S
Step 1
I N S T R U C T I O N S
Before beginning assembly please take the time to read the instructions thoroughly. Please use the catalog in this manual to make sure that all parts have been included in your shipment. When ordering use the part number and description from the catalog. Use only Hoist replacement parts when servicing. Failure to do so will void your warranty and could result in personal injury.
Hoist equipment is designed to provide the smoothest, most effective exercise motion possible. After assembly you should check all functions to ensure correct operation. If you experience problems, first recheck the assembly instructions to locate any possible errors made during assembly. If you are unable to correct the problem, call your authorized Hoist dealer. Be sure to have your serial number and this catalog when calling. When all parts have been accounted for continue on to Step 2.
TOOLS REQUIRED
2407 Assembly
Standard Allen Wrench Set
(2.5mm, 3/32” - 5/16”)
Crescent Wrench
Belt Tensioning Wrench
(Hoist Tool SM374)
Rubber Mallet
Tape Measure
HOIST
R
FITNESS SYSTEMS
Page - 2