A SS E M B LY
I N S T R U C T I O N S
Step 2e
F R A M E A S S E M B L Y
In this step, attach (CN) and the (50) to the (1). Now assemble (CM) and (47). Next you will need to secure (48) to (21) by sandwiching between two (46’s). Now secure the other end of (48) to the rear of (47) in similar fashion. Insure (48)’s smooth side is facing ((21). Then Wrench tighten bolts including all previously hand tightened bolts.
Part Descriptions | Hardware Descriptions | |
1 - Seat Assembly | M - | |
| ||
21 | - ROM/CAM Assembly | N - |
| ||
46 | - Clamp | J - |
| ||
47 | - Pulley Bracket | AD - 1/4” Flat Washer (Black Zinc) |
| ||
48 | - Cam Belt 37”x 15/16”x 1/8” | AE - 3/8” Flat Washer (White Zinc) |
| ||
50 | - | AF - 3/8” Lock Washer (White Zinc) |
|
BA - 1/4” Lock Nut (White Zinc)
CM - 3 1/4” Pulley
CN - 3 1/4” Pulley
Page 13
HOIST
FITNESS SYSTEMS
R
2407 Assembly