See Diagram | Impex MWM-1840 instruction

STEP 6 (See Diagram 6)

A.) Attach the Left Dip Support (#28) into Right Dip Support (#27) behind the Power Station Vertical Frame (#26).

B.) Attach the holes on the bracket of Left & Right Dip Support to the hole on the Vertical Frame. Align the holes. Secure the Left & Right Dip Support, and the Vertical Frame together with one M10 x 4 7/8” Hex Bolt (#86), one Ø 1” Washers (#92), one Ø ¾” Washer (#91), and one M10 Aircraft Nut (#97). Do not over tighten the Nuts and Bolts. Make sure the Left and Right Dip Support are able to move up freely.

C.) Secure the Left & Right Dip Support together with two M10 x 2 ½” Allen Bolts (#76), two Ø ¾” x 1 1/8” Curved Washers (#95), and two M10 Aircraft Nuts (#97).

D.) When doing Chin-up exercise, fold up the Left & Right Dip Support. Insert the 4” Power Station Lock Pin (#62) through the holes on Right Dip Support into the open slot on the back of Power Station Vertical Frame to hold up both Dip Supports in position.