Assembly
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
DIAGRAM 2
STEP 2
Attach two Bushings (#23) to each Seat Support Frames (#6).
Attach one Backrest Support (#7) to the Seat Support Frame (#6). Align the holes and secure them with one M10×1 5/8" Allen Bolt (#32) and one 3/4" Washer (#39). (Repeat the same procedure to install the other side.
Attach the two Backrest Supports (#7) to the pivot on the Main Frame (#1). Align the holes and secure them with one M10×6 1/4" Allen Bolt (#35), two 3/4" Washers (#39) and one M10 Nylon Nut (#41).
6