Assembly
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
DIAGRAM 4
STEP 4
Attach the Seat Incline Support Bracket (#8) to the Main Frame (#1). Secure it with one M10×4 3/4" Allen Bolt (#34), two 3/4" Washers (#39) and one M10 Nylon Nut (#41). Do not over tighten the nut and bolt. The Bracket needs to be able to swivel. Attach two bushings (#23) to the pivot on the Seat Incline Support Bracket (#8).
Attach the Seat Support Frames (#6) to the pivot of the Seat Incline Support Bracket (#8). Align the holes and secure them with one M10×8 1/4" Allen Bolt (#36), two 3/4” Washers (#39) and one M10 Nylon Nut (#41).
8