JVC CA-MXG65V, CA-MXG68V manual Troubleshooting, English

Page 34
Troubleshooting

English

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

Unable to cancel the display demonstration.

No sound is heard.

Hard to listen to broadcasts because of noise.

The disc sound is discontinuous.

The carrousel does not open or close.

The disc does not play.

The cassette holders cannot be opened.

Impossible to record.

Stereo effect is lost.

Operations are disabled.

Unable to operate the unit from the remote control.

Cause

Other buttons are pressed to cancel the display demonstration.

Connections are incorrect or loose.

Antennas are disconnected.

The AM loop antenna is too close to the unit.

The FM antenna is not properly extended and positioned.

The disc is scratched or dirty.

The AC power cord is not plugged in.

The carrousel is locked.

The disc is placed upside down.

Power supply from the AC power cord has been cut off while the tape was running.

Small tabs on the back of the cassette are removed.

Vocal Masking is activated.

The built-in microprocessor may malfunction due to external electrical interference.

The path between the remote control and the remote sensor on the unit is blocked.

The batteries are exhausted.

Action

Press DEMO on the unit. (See page 8.)

Check all connections and make corrections. (See pages 6 to 8.)

Reconnect the antennas correctly and securely.

Change the position and direction of the AM loop antenna.

Extend the FM antenna at the best position.

Clean or replace the disc. (See page 28.)

Plug the AC power cord.

Unlock the carrousel. (See page 15.)

Place the disc with the label side up.

Turn on the unit.

Cover the holes with adhesive tape.

Cancel the Vocal Masking. (See page 23.)

Unplug the AC power cord and then plug it back in.

Remove the obstruction.

Replace the batteries.

– 29 –

Image 34
Contents CA-MXG68V INSTRUCTIONSCA-MXG65V LVT0700 -001AG-1 Warnings, Cautions and OthersCaution --switch English G-21.Do not remove screws, covers or cabinet CA-MXG65V CA-MXG68V G-3Caution Proper Ventilation CA-MXG65V CA-MXG68VIMPORTANT FOR LASER PRODUCTS G-4CLASS LASER PRODUCT REPRODUCTION OF LABELSPower sources PrecautionsInstallation IntroductionContents EnglishFront Panel Location of the Buttons and ControlsEnglish Display window Front PanelEnglish Remote Control EnglishGetting Started Connecting AntennasPutting the Batteries into the Remote Control Unpacking2Insert the end of the speaker cord into the Connecting Speakers3Release the finger from the clamp terminalCancelling the Display Demonstration Connecting Other EquipmentAdjusting the Voltage Selector On the unit ONLY3 Press 4or ¢to adjust the Turning On or Off the PowerSetting the Clock Press CLOCK/TIMERTo turn down the volume level temporarily Adjusting the VolumeSetting the AM Tuner Interval Spacing Selecting the SourcesSurround modes Reinforcing the Bass SoundSelecting the Sound Modes SEA Sound Effect Amplifier modes ROCK POP CLASSICPresetting Stations Tuning in a StationTuning in a Preset Station Press and hold TUNING + orLoading Discs When playing a CD-Ror CD-RWPlaying Back Discs Playing Back the Entire Discs - Continuous PlayBasic Disc Operations Programming the Playing Order of the TracksProgram Play Press PROGRAMProhibiting Disc Ejection - Tray Lock Playing at Random - Random PlayRepeating Tracks or Discs - Repeat Play 1 Load a discPlaying Video CDs To adjust the color system - NTSC/PALPress SLOW on the remote control during playback Special Plays for Video CDsTo stop and cancel the video intro, press Press STILL on the remote control duringPress ON SCREEN on the remote control To stop and cancel the highlight, pressPlaying Video CDs with PBC Function High-resolutionstill picturesPlaying Video CDs with Using Menu Screens 2 Prepare Video CDs3 Press PBC on the unit Playing Video CDs without Using Menu Screen2 Prepare a Video CD 4 Start playback of the Video CD1 Press EJECT 0 for the deck you want to use Playing Back TapesPlaying Back a Tape 3 Close the cassette holder gentlyRecording a Tape on Deck B To clean the head, capstan, and pinch rollerRecording On the unit ONLY 1 Press EJECT 0 for the deck BOn the unit ONLY 1 Press TAPE 3, then Dubbing TapesCD Synchronized Recording Press DUBBINGMicrophone Mixing Using the MicrophonesSinging Along Karaoke 4 Press KARAOKE on the remoteOn the remote control ONLY Using Multiplex Discs - Multiplex Sound MPXAdjusting Key Control On the remote control ONLY 1 Start the source CD1 Press CLOCK/TIMER repeatedly Using the TimersUsing Daily Timer 2 Press CLOCK/TIMER again8 Press SET to complete the Daily Timer setting Using Recording Timer7 Press 4or ¢to set the volume level Press CLOCK/TIMER repeatedly6 Select the preset station Using Sleep TimerTimer Priority 4 Set the on-timeyou want the unitHandling cassette tapes MaintenanceHandling discs To clean the discTroubleshooting EnglishAmplifier section - CA-MXG65V/CA-MXG68V SpecificationsSupplied accessories TunerEN, CH VOLTAGE SETTINGIMPORTANT for mains AC line 0501KSMMDWSAMPage Page