ProForm 831.29948 user manual

Page 21

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a UL-listed surge suppressor, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

b. If the walking belt Is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 114 of a tum. When the walking belt is propedy tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the, walking belt centered. Plug In the power cord, in- sert the key and run the treadmill for a few minutes.

Repeat until the walking belt is propedy tightened.

b

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our toll-free HELPLINE.

PROBLEM: The walking belt is off-center

SOLUTION: a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the tread-

mill for a few minutes. Repeat until the walking belt is centered.

b. If the walking belt has shifted to the right, first re- move the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjust- ment bolt counterclockwise, and the right bolt clockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. P!ug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

PROBLEM: The walking belt slips when walked on

SOLUTION: a. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is cor- rectly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is propedy tightened.

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com CD'sand videos are played

SOLUTION: a. With the key inserted in the console, press one of the INCLINE buttons. While the incline is changing, remove the key. After a few seconds, re-insert the key. The treadmill will automati-

cally rise to themaximum incline level and then return to the minimum level. This will recalibrate the incline.

21

Image 21
Contents Bearb Roebuck ElplinPatent Pending Hoffman EstatesPRO.FORM 8 3 5 Q T Important Precautions Page Lock Knob Not includedLeft Side Right SideAssembly Plastic Tie PostPerformant Lube TM Walking Belt HOW to Plug in the Power CordFeatures of the Console Console DiagramSelect the manual mode HOW to Turn on the PowerLocate the on/off FollowSPEED/MIN-MILE SpeedCALS. FAT¢ALG Insert the key into the console MA+HOW to Connect Your Portable Stereo HOW to Connect Your Portable CD PlayerHOW to Connect YoUR Omputer HOW to Connect Your Home StereoWire removed from StereoInsert the key fully into the console HOW to Connect Your VCRMeasure your heart rate, if desired See on Stopped by pressing the Stop button on your CD payer or VCRPage Optional Chest Pulse Sensor Optional Hand WeightsHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USECheck the on/off switch located on the treadmill near TROUBLE-SHOOTINGPage Workout Guidelines Exercise IntensityRosa Save the Exploded Drawing For Future Reference Exploded11o Model No Full 90 DAY WarrantySEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL Part No R0800A