JVC XU-301BK manual Adding track numbers, Sampling rate converter, Microphone connections

Page 29

Adding track numbers ———————————————————

•Recording the numbers automatically

With CD digital recordings, the numbers are added automatically following the numbers in the recording source.

•Adding your own numbers (at any time except during synchro REC)

When MANUAL is set using the TRACK MARKING button and the SET button on the main unit or remote control is pressed during recording, a number can be added exactly where desired.

Sampling rate converter ——————————————————

The unit incorporates a sampling rate converter to ensure that the original digital signals will be recorded regardless of the sampling frequency (32 kHz, 44.1 kHz or 48 kHz) of the recording source.

Microphone connections —————————————————

Use a microphone equipped with a standard plug.

Microphone purchased separately

English

MIC

6.3 mm diameter

OFF

ON

• If the microphone has an

standard plug

NOTICE

ON/OFF switch, set it to ON.

•To prevent the erasure of important recordings

Each recording MD comes with an accidental erasure prevention knob to ensure that important recordings will be not erased by mistake. After recording or editing material, slide the knob on the cartridge side to the open position. This prevents recording over or editing of the existing material. To proceed with recording over or editing, return the knob to the closed position.

Accidental erasure prevention knob

 

 

Set the knob to the open

 

 

 

 

 

 

 

position to prevent existing

Set the knob to the closed

 

material from being erased

position to record or edit.

 

accidentally.

•When sticking adhesive labels onto MD cartridges for use

Adhere the label securely all the way to the edge of the cartridge so that it will not peel off. If the label protrudes from its adhesion area or is not adhered properly, it may not be possible to eject the MD or some other trouble may result.

Analog signals are recorded when the line input and mic input signals are mixed and recorded. The recording input level must be adjusted.

The “DISC PROTECTED” display appears 3 times and then is released when recording operations are performed for a MD whose accidental erasure prevention knob has been set to the open position.

27

Page 28 Page 30
Image 29
Page 28 Page 30
Contents XU-301BK AC power cord Table of Contents Cleaning the cabinet PrecautionsInstallation 3CD + MD combination deck FeaturesTimer functions Connections Do not turn on the power until allAnalog Connections Connections have been completedDigital Connections Display window Names of the PartsMD Parts Installing the dry batteries Using the Remote ControlRemote control operations How to use the remote control correctlyNames of the buttons regular control panel Character input buttons See Names of the buttons editing control panelNot used Upper/lower-case letter selector button See ¢ / buttons See pages 25Power ON/OFF operations Power ON/OFF OperationsTo turn on the power To turn off the powerContinuous Play playing CD1, CD2 and CD3 through once each Listening to CDsStopping CD play Playing CDs using the 6 buttonStopping play at any time Stopping play temporarilyCD Text CD Pitch ControlTo view the CD text information \ Disc Title or Track TitleReverse Search and Forward Search Direct Play starting play from a spe- cific trackTo release the random play mode Repeat Play using the remote controlSkipping Tracks Random Play· 6 · 5 Giving a title to a CDSelect the CD which is to be given a title Press the Title buttonFrom on Input the title using up to 32 charactersUse the jog dial to select and enter the genre List of Music Genres Disc Lock FunctionGenre To prevent children from taking out or inserting CDsStopping MD play Listening to MDsPlaying all tracks Changing the display in the display window When the MD has been placed insideAfter pressing the MD button Clean at regular intervalsKeep MDs away from the following locations P1 no Program MIX Program Play Press the 6 button to start MIX Program play Playing MIX PROGRAMs using the remote controlTypes of recording Recording onto MDsMicrophone connections Adding track numbersSampling rate converter Manual Recording CD play and MD recording are started simultaneously CD Recording single-action recordingSelect and stop the CD to be recorded Press the CD REC button to start the recordingCD Recording 1st Track recording Select CD1 and establish the stop modeTo stop the recording at any time Only the first tracks on the CDs can be recorded on the MDCD Recording Listening Edit recording When Manual has been set When Auto has been setMixing Recording Track markingSelect two recording sources Adjust the recording level and mixing balanceErasing tracks Erase function Dividing tracks Divide functionJoining tracks Join function Erasing all the tracks ALL Erase function· 5 -2 3 · Dividing tracks Divide functionInsert the MD to be edited, and set the function to MD Select DivideJoining tracks Join function Eject the MD. \ The editing mode is now exitedPress the Edit button Select JoinSelect Move Moving tracks Move function· 6 4 -1· 5 Select the destination to which the track is to be moved Select the track to be movedSelect the track to be erased and play it Erasing a track Erase functionSelect Erase Select ALL Erase Erasing all the tracks ALL Erase functionTo give a title to a disc Disc TITLE. Press the SET button Giving titles to discs and tracks Title function· 3 -2 · Enter 2 the selection Giving titles to discs and tracks using the remote control Editing operations using the remote controlPress the Enter button Eject the MD. \ This completes the editingUpper-case letters Character Layout TableLower-case letters NumbersSetting the Present Time Setting the ClockExample Setting the time to 115 PM while the power is OFF Press the TIMER/CLOCK buttonTimer Play wake-up play Timer OperationsContinues to page 48 or Set the timer start time this unit uses a 12-hour clockSet the timer end time From page 47 while PLAY? is flashing Turn off the powerClearing a timer operation Place the recording MD in position Select REC? and press the SET buttonCompu Link Function Connection to CD player or CD changer refer to page 4 Text Compu Link Control SystemConnections with amplifier or receiver refer to Information on MDs Minidiscs Error message Significance Remedy MD Minidisc Error MessagesRestrictions Imposed by MDs Minidiscs Symptom CauseRestriction on Copying Digital Material Scms Serial Copy Management SystemSymptom Cause Remedial action/check TroubleshootingCheck out the points below before Requesting repairs or servicingCommon Specifications Timer SectionAccessories CD Player SectionEN,FR JVC 0298IMMIDESAN

XU-301BK specifications

The JVC XU-301BK is an impressive addition to the world of audio equipment, offering a blend of style, versatility, and advanced technology. Designed for music lovers who seek high-quality sound, the XU-301BK is particularly well-suited for home use, whether for casual listening or serious audiophile applications.

One of the standout features of the JVC XU-301BK is its powerful amplifier. With a substantial output, it delivers clear and dynamic sound across a range of frequencies, making it perfect for various music genres. This amplifier supports a robust output capability, ensuring that it can drive a range of speakers, catering to different room sizes and acoustic environments.

The XU-301BK comes equipped with multiple input options, including USB, AUX, and Bluetooth connectivity. This allows users to connect their smartphones, tablets, or laptops effortlessly. The Bluetooth functionality enables wireless streaming of music from any compatible device, giving users the freedom to enjoy their favorite tracks without the hassle of wires.

Another impressive feature is the built-in equalizer, which allows users to customize their listening experience. With adjustable presets and manual settings, audiophiles can fine-tune the sound to their specific preferences, whether they desire a richer bass or clearer treble. This level of customization ensures that every listening session is a delight.

In terms of design, the JVC XU-301BK boasts a sleek and modern aesthetic. Its compact form makes it easy to integrate into any home environment, whether placed on a shelf or used as part of a larger home theater setup. The intuitive controls and digital display enhance usability, making it easy to navigate through various functions.

The JVC XU-301BK also features advanced sound technologies that enhance audio performance. High-Resolution Audio compatibility ensures that users can enjoy studio-quality sound, while the latest processing techniques minimize distortion, providing a clean and immersive listening experience.

With its combination of powerful sound, versatile connectivity options, and user-friendly design, the JVC XU-301BK is an exceptional choice for anyone looking to enhance their audio experience. Whether you are an avid music lover or someone who appreciates quality sound, this model offers a comprehensive solution that builds on JVC’s legacy of audio excellence.
Top Page Image Contents