JVC XU-301BK manual CD Recording single-action recording, Select and stop the CD to be recorded

Page 31

When DIGITAL IN UNLOCK is scrolled and displayed, the OPTICAL IN connector is not connected to the source unit.

In the case of an MD with some remaining space, the end of the last track recorded is automatically searched, and recording is commenced immediately.

To record over all the existing tracks, erase all the tracks using the ALL ERASE function (see page 40), and then proceed with the new recordings.

Upon completion of the MD recording, “UTOC WRITING” is displayed. Operating any button while this message is displayed may render the MD unusable.

Always wait for “UTOC WRITING” to be cleared before proceeding with the next operation.

When digital input signals are supplied, they will be recorded in their original digital form. There is no need to adjust their recording level.

CD Recording (single-action recording)

CD play and MD recording are started simultaneously.

English

 

 

3

 

 

XU-301 MD-CD COMBINATION DECK

 

CD 3

 

 

 

CD 2

 

 

 

CD 1

 

 

3-CD

 

 

PLAY & EXCHANGE

STANDBY

TIMER

CD PITCH CONTROL

 

 

/CLOCK

1st TRACK

LISTENING

 

 

REC

EDIT

POWER

 

NORMAL SPEED

 

CD REC

SKIP

1-1

 

 

32kHz

REC

REC

REC

PAUSE

START

STOP

2

 

 

1 -2

 

 

 

 

DIGITAL INPUT

 

 

 

DISPLAY

 

 

44.1kHz

48kHz

 

EDIT

TITLE

/CHARA

PLAY MODE

 

 

MIXING

CANCEL

 

 

 

SET

DIGITAL

CD

LINE

MIC

 

 

 

 

 

REC SOURCE SELECTOR

 

 

 

 

 

 

 

 

 

MIX BALANCE

REC LEVEL

 

 

 

CD

 

 

 

 

 

 

 

MD

LINE

CD

MIN

MAX

 

 

 

 

MIC

LINE

 

 

 

 

 

 

MIC

 

PHONES

SAMPLING RATE CONVERTER

1Select and stop the CD to be recorded.

Example: When recording CD1

• Only the selected CD is recorded.

2Insert the recording MD.

• Insert the MD with its label side facing up.

 

CD REC

3

Press the CD REC button to start the recording.

 

 

 

 

 

•CD play and MD recording start simultaneously. This is called synchro recording. Recording

starts from track 1.

Remaining play time of

Remaining recording

track being recorded

time on MD

CD

MD

TOC REC

DIGITAL

L

R

40 30 20 15 10 6 3 0

“DIGITAL” is displayed.

•When a CD is recorded, its digital signals are recorded in their original form. A track mark is automatically placed where one track changes to the next, and the track number also changes.

•When MD recording is completed

After “UTOC WRITING” is displayed, operation stops automatically. It also stops automatically when CD play finishes. CD play is transferred to the next tray.

•

Main unit

 

Remote control

 

 

 

DISPLAY

/CHARA

The mode changes each time this is pressed.

To check a track number during recording

Press DISPLAY/CHARA button (or DISPLAY MODE on the remote control).

Remaining time of

ä Remaining recording time on MD

\

track being recorded

Ç

CD number and track number ä MD track number

29

Page 30 Page 32
Image 31
Page 30 Page 32
Contents XU-301BK AC power cord Table of Contents Installation PrecautionsCleaning the cabinet Timer functions Features3CD + MD combination deck Connections have been completed Do not turn on the power until allConnections Analog ConnectionsDigital Connections Display window Names of the PartsMD Parts How to use the remote control correctly Using the Remote ControlInstalling the dry batteries Remote control operationsNames of the buttons regular control panel ¢ / buttons See pages 25 Names of the buttons editing control panelCharacter input buttons See Not used Upper/lower-case letter selector button SeeTo turn off the power Power ON/OFF OperationsPower ON/OFF operations To turn on the powerContinuous Play playing CD1, CD2 and CD3 through once each Listening to CDsStopping play temporarily Playing CDs using the 6 buttonStopping CD play Stopping play at any time\ Disc Title or Track Title CD Pitch ControlCD Text To view the CD text informationReverse Search and Forward Search Direct Play starting play from a spe- cific trackRandom Play Repeat Play using the remote controlTo release the random play mode Skipping TracksPress the Title button Giving a title to a CD· 6 · 5 Select the CD which is to be given a titleUse the jog dial to select and enter the genre Input the title using up to 32 charactersFrom on To prevent children from taking out or inserting CDs Disc Lock FunctionList of Music Genres GenrePlaying all tracks Listening to MDsStopping MD play Changing the display in the display window When the MD has been placed insideKeep MDs away from the following locations Clean at regular intervalsAfter pressing the MD button P1 no Program MIX Program Play Press the 6 button to start MIX Program play Playing MIX PROGRAMs using the remote controlTypes of recording Recording onto MDsSampling rate converter Adding track numbersMicrophone connections Manual Recording Press the CD REC button to start the recording CD Recording single-action recordingCD play and MD recording are started simultaneously Select and stop the CD to be recordedOnly the first tracks on the CDs can be recorded on the MD Select CD1 and establish the stop modeCD Recording 1st Track recording To stop the recording at any timeCD Recording Listening Edit recording Track marking When Auto has been setWhen Manual has been set Mixing RecordingSelect two recording sources Adjust the recording level and mixing balanceErasing all the tracks ALL Erase function Dividing tracks Divide functionErasing tracks Erase function Joining tracks Join functionSelect Divide Dividing tracks Divide function· 5 -2 3 · Insert the MD to be edited, and set the function to MDSelect Join Eject the MD. \ The editing mode is now exitedJoining tracks Join function Press the Edit button· 6 4 -1· 5 Moving tracks Move functionSelect Move Select the destination to which the track is to be moved Select the track to be movedSelect Erase Erasing a track Erase functionSelect the track to be erased and play it Select ALL Erase Erasing all the tracks ALL Erase function· 3 -2 · Giving titles to discs and tracks Title functionTo give a title to a disc Disc TITLE. Press the SET button Enter 2 the selection Eject the MD. \ This completes the editing Editing operations using the remote controlGiving titles to discs and tracks using the remote control Press the Enter buttonNumbers Character Layout TableUpper-case letters Lower-case lettersPress the TIMER/CLOCK button Setting the ClockSetting the Present Time Example Setting the time to 115 PM while the power is OFFTimer Play wake-up play Timer OperationsSet the timer end time Set the timer start time this unit uses a 12-hour clockContinues to page 48 or Clearing a timer operation Turn off the powerFrom page 47 while PLAY? is flashing Place the recording MD in position Select REC? and press the SET buttonCompu Link Function Connections with amplifier or receiver refer to Text Compu Link Control SystemConnection to CD player or CD changer refer to page 4 Information on MDs Minidiscs Error message Significance Remedy MD Minidisc Error MessagesScms Serial Copy Management System Symptom CauseRestrictions Imposed by MDs Minidiscs Restriction on Copying Digital MaterialRequesting repairs or servicing TroubleshootingSymptom Cause Remedial action/check Check out the points below beforeCD Player Section Timer SectionCommon Specifications AccessoriesEN,FR JVC 0298IMMIDESAN

XU-301BK specifications

The JVC XU-301BK is an impressive addition to the world of audio equipment, offering a blend of style, versatility, and advanced technology. Designed for music lovers who seek high-quality sound, the XU-301BK is particularly well-suited for home use, whether for casual listening or serious audiophile applications.

One of the standout features of the JVC XU-301BK is its powerful amplifier. With a substantial output, it delivers clear and dynamic sound across a range of frequencies, making it perfect for various music genres. This amplifier supports a robust output capability, ensuring that it can drive a range of speakers, catering to different room sizes and acoustic environments.

The XU-301BK comes equipped with multiple input options, including USB, AUX, and Bluetooth connectivity. This allows users to connect their smartphones, tablets, or laptops effortlessly. The Bluetooth functionality enables wireless streaming of music from any compatible device, giving users the freedom to enjoy their favorite tracks without the hassle of wires.

Another impressive feature is the built-in equalizer, which allows users to customize their listening experience. With adjustable presets and manual settings, audiophiles can fine-tune the sound to their specific preferences, whether they desire a richer bass or clearer treble. This level of customization ensures that every listening session is a delight.

In terms of design, the JVC XU-301BK boasts a sleek and modern aesthetic. Its compact form makes it easy to integrate into any home environment, whether placed on a shelf or used as part of a larger home theater setup. The intuitive controls and digital display enhance usability, making it easy to navigate through various functions.

The JVC XU-301BK also features advanced sound technologies that enhance audio performance. High-Resolution Audio compatibility ensures that users can enjoy studio-quality sound, while the latest processing techniques minimize distortion, providing a clean and immersive listening experience.

With its combination of powerful sound, versatile connectivity options, and user-friendly design, the JVC XU-301BK is an exceptional choice for anyone looking to enhance their audio experience. Whether you are an avid music lover or someone who appreciates quality sound, this model offers a comprehensive solution that builds on JVC’s legacy of audio excellence.
Top Page Image Contents