JVC XU-301BK manual Precautions, Installation, Cleaning the cabinet

Page 4

English

Precautions

1. Safeguarding against electric shocks, fire hazards and damage

1)A very low current will still flow even when the POWER button is set at STANDBY. To save power and ensure safety when the unit is not going to be used for an extended period of time, disconnect the power cords from the household AC outlet.

2)Do not handle the power cord with wet hands.

3)To unplug the power cord from the wall outlet, always take hold of the molded plug part and pull the plug free rather than pulling the cord.

4)If the power cord is damaged or found to have a disconnected wire or a contact failure, consult your dealer.

5)Do not bend the cord at a sharp angle, and do not pull or twist it.

6)Do not modify the power cord in any way.

7)Do not remove the screws in order to disassemble the unit, and do not touch any of the parts inside the unit.

8)Do not insert metallic objects into the unit.

9)Unplug the power cord if there is a chance that lightning may strike.

10)If water should find its way inside the unit, unplug the power cord from the outlet, and consult your dealer.

11)Do not install the unit in a poorly ventilated location.

2. Installation

1)Avoid placing the unit on or adjacent to an amplifier: this is to prevent the humming caused by the unit’s proximity to some types of amplifiers. Move the unit where it will not be affected by the amplifier.

2)Avoid installing the unit where the ambient temperature will exceed 35 °C (95 °F) (namely, in direct sunlight, near a heating appliance, etc.) or drop below 5 °C (41 °F), where it it is very humid or

dusty, or where the unit will be subject to vibration.

3)The unit may not function properly if it is moved suddenly from a cold place (0 °C (32 °F)) to a warm place since condensation may form inside the unit. In such a case, leave the unit standing for about 30 minutes, after which time it should function properly.

3.Cleaning the cabinet

Never use benzine or paint thinners to clean the cabinet as they may mar the unit’s surface finish.

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents XU-301BK AC power cord Table of Contents Installation PrecautionsCleaning the cabinet Timer functions Features3CD + MD combination deck Do not turn on the power until all ConnectionsAnalog Connections Connections have been completedDigital Connections Names of the Parts Display windowMD Parts Using the Remote Control Installing the dry batteriesRemote control operations How to use the remote control correctlyNames of the buttons regular control panel Names of the buttons editing control panel Character input buttons SeeNot used Upper/lower-case letter selector button See ¢ / buttons See pages 25Power ON/OFF Operations Power ON/OFF operationsTo turn on the power To turn off the powerListening to CDs Continuous Play playing CD1, CD2 and CD3 through once eachPlaying CDs using the 6 button Stopping CD playStopping play at any time Stopping play temporarilyCD Pitch Control CD TextTo view the CD text information \ Disc Title or Track TitleDirect Play starting play from a spe- cific track Reverse Search and Forward SearchRepeat Play using the remote control To release the random play modeSkipping Tracks Random PlayGiving a title to a CD · 6 · 5Select the CD which is to be given a title Press the Title buttonUse the jog dial to select and enter the genre Input the title using up to 32 charactersFrom on Disc Lock Function List of Music GenresGenre To prevent children from taking out or inserting CDsPlaying all tracks Listening to MDsStopping MD play When the MD has been placed inside Changing the display in the display windowKeep MDs away from the following locations Clean at regular intervalsAfter pressing the MD button P1 no Program MIX Program Play Playing MIX PROGRAMs using the remote control Press the 6 button to start MIX Program playRecording onto MDs Types of recordingSampling rate converter Adding track numbersMicrophone connections Manual Recording CD Recording single-action recording CD play and MD recording are started simultaneouslySelect and stop the CD to be recorded Press the CD REC button to start the recordingSelect CD1 and establish the stop mode CD Recording 1st Track recordingTo stop the recording at any time Only the first tracks on the CDs can be recorded on the MDCD Recording Listening Edit recording When Auto has been set When Manual has been setMixing Recording Track markingAdjust the recording level and mixing balance Select two recording sourcesDividing tracks Divide function Erasing tracks Erase functionJoining tracks Join function Erasing all the tracks ALL Erase functionDividing tracks Divide function · 5 -2 3 ·Insert the MD to be edited, and set the function to MD Select DivideEject the MD. \ The editing mode is now exited Joining tracks Join functionPress the Edit button Select Join· 6 4 -1· 5 Moving tracks Move functionSelect Move Select the track to be moved Select the destination to which the track is to be movedSelect Erase Erasing a track Erase functionSelect the track to be erased and play it Erasing all the tracks ALL Erase function Select ALL Erase· 3 -2 · Giving titles to discs and tracks Title functionTo give a title to a disc Disc TITLE. Press the SET button Enter 2 the selection Editing operations using the remote control Giving titles to discs and tracks using the remote controlPress the Enter button Eject the MD. \ This completes the editingCharacter Layout Table Upper-case lettersLower-case letters NumbersSetting the Clock Setting the Present TimeExample Setting the time to 115 PM while the power is OFF Press the TIMER/CLOCK buttonTimer Operations Timer Play wake-up playSet the timer end time Set the timer start time this unit uses a 12-hour clockContinues to page 48 or Clearing a timer operation Turn off the powerFrom page 47 while PLAY? is flashing Select REC? and press the SET button Place the recording MD in positionCompu Link Function Connections with amplifier or receiver refer to Text Compu Link Control SystemConnection to CD player or CD changer refer to page 4 Information on MDs Minidiscs MD Minidisc Error Messages Error message Significance RemedySymptom Cause Restrictions Imposed by MDs MinidiscsRestriction on Copying Digital Material Scms Serial Copy Management SystemTroubleshooting Symptom Cause Remedial action/checkCheck out the points below before Requesting repairs or servicingTimer Section Common SpecificationsAccessories CD Player SectionEN,FR JVC 0298IMMIDESAN

XU-301BK specifications

The JVC XU-301BK is an impressive addition to the world of audio equipment, offering a blend of style, versatility, and advanced technology. Designed for music lovers who seek high-quality sound, the XU-301BK is particularly well-suited for home use, whether for casual listening or serious audiophile applications.

One of the standout features of the JVC XU-301BK is its powerful amplifier. With a substantial output, it delivers clear and dynamic sound across a range of frequencies, making it perfect for various music genres. This amplifier supports a robust output capability, ensuring that it can drive a range of speakers, catering to different room sizes and acoustic environments.

The XU-301BK comes equipped with multiple input options, including USB, AUX, and Bluetooth connectivity. This allows users to connect their smartphones, tablets, or laptops effortlessly. The Bluetooth functionality enables wireless streaming of music from any compatible device, giving users the freedom to enjoy their favorite tracks without the hassle of wires.

Another impressive feature is the built-in equalizer, which allows users to customize their listening experience. With adjustable presets and manual settings, audiophiles can fine-tune the sound to their specific preferences, whether they desire a richer bass or clearer treble. This level of customization ensures that every listening session is a delight.

In terms of design, the JVC XU-301BK boasts a sleek and modern aesthetic. Its compact form makes it easy to integrate into any home environment, whether placed on a shelf or used as part of a larger home theater setup. The intuitive controls and digital display enhance usability, making it easy to navigate through various functions.

The JVC XU-301BK also features advanced sound technologies that enhance audio performance. High-Resolution Audio compatibility ensures that users can enjoy studio-quality sound, while the latest processing techniques minimize distortion, providing a clean and immersive listening experience.

With its combination of powerful sound, versatile connectivity options, and user-friendly design, the JVC XU-301BK is an exceptional choice for anyone looking to enhance their audio experience. Whether you are an avid music lover or someone who appreciates quality sound, this model offers a comprehensive solution that builds on JVC’s legacy of audio excellence.
Top Page Image Contents