®
SKU
®
SKU
®
SKU
Thank you for buying a Black & Decker paper shredder. Black & Decker paper shredders have become the benchmark for innovation, performance and quality to protect against identity theft. We have taken great care in designing and engineering a product to meet and exceed your needs.
To ensure years of safe, efficient performance, please read these important product usage and safety instructions.
Customer Service
Black & Decker has a
and Canada if you have any questions regarding our product. Our customer service phone number is
The Following Are Important Safety Instructions.
Read All Instructions Before Using.
W A R N I N G | KEEP OUT OF REACH OF CHILDREN |
WARNING: Hazardous moving parts. Keep fingers and other body parts away.
WARNING: To reduce risk of fire, electrical shock or injury:
NEVER allow children to operate a paper shredder, even under adult supervision. A paper shredder is NOT a toy.
DO NOT use flammable synthetic oil,
DO NOT operate any electrical product with a damaged cord.
AVOID getting jewelry, hair or loose clothing too close to feed slot as serious injury can occur. DO NOT handle plug or product with wet hands.
ALWAYS keep children and pets away from the shredder. ALWAYS unplug shredder when not in use.
DO NOT attempt to feed more sheets of paper than specified on the feeder. DO NOT attempt to shred materials other than paper or credit cards. ALWAYS empty the wastebasket prior to becoming full.
DO NOT place shredder near heat or water source.
DO NOT open shredder head to attempt repair: It could expose you to electric shock and will void your warranty.
The
WARNING ICONS: The icons on top of the shredder warn the user of the potential dangers if the shredder is used improperly.
NO | NO FINGERS | NO LOOSE | NOT | NO | NO | ||
HAIR | OR HANDS | CLOTHING | A TOY | AEROSOL CANS | FASTENERS | ||
|
|
|
|
|
|
|
|
Setup
•Mount the shredder securely to the base. This shredder features a safety power cut off and will not operate if the shredder is not properly attached.
•A
Operation
HOW TO USE YOUR SHREDDER
1.Place shredder head onto bin. Button on side will pop into place securing the head onto the bin (fig 2).
2.Slide safety shield to the open position (fig 3).
3.To empty bin, depress release button and remove head. Shreds should be emptied into separate waste bin. ALWAYS unplug before emptying bin.
To begin shredding, locate the power switch (2) on the unit and select the “Auto” mode. The green LED light indicates the shredder is “On” and ready to use. Slide the safety shield
(4) to the right until it clicks into place and exposes the paper feed slot.
When the “Bin Full” light (See “Product Information” section) turns on, the bin (7) is full and the shredder will not operate. Press the release button (5) on the right hand side of the shredder, and lift the shredder off of the bin. Empty the bin before reattaching the shredder.
This shredder has a 4 position power switch:
REV
OFF
AUTO
FWD
figure 1
1Easy Carrying Handle
3Indicator Lights
4Safety Shield
5 Release
Button
6 Viewing
Window
7 Bin
Maintenance
Regular emptying of the bin is important to ensure the smooth operation of the cutting cylinders. The shredder will not operate when the bin is full. Regular oiling is also necessary for proper performance. It is recommended to use shredder oil every few weeks. Apply across shredder entry, then run a single sheet through.
CLEANING
Always unplug the shredder before cleaning!
•Only clean the shredder by wiping the unit with a dry soft cloth or towel.
•Do not clean or immerse shredder in water. Getting the unit wet may result in damage or malfunction to the electrical components. If the shredder happens to get wet, be sure to completely dry the unit immediately with a soft cloth or towel.
•Never use anything flammable to clean the shredder. This may result in serious injury or damage to the shredder.
W A R N I N G
Troubleshooting
If you have a problem with your shredder, check the symptoms and remedies below. If you cannot solve the problem this way, contact Black & Decker paper shredders Customer Service. Do not open shredder head to attempt repair: It could expose you to electric shock and will void your warranty.
Symptom |
| Remedy |
|
| |
Shredder does not start | - Make sure shredder is plugged in and Power Switch (1) is | |
or stops while shredding. |
| in the ON |
| - Wait 30 minutes for shredder to cool down before trying again. | |
| - Make sure that the shredder is properly mounted to the base. | |
|
| The shredder has a safety power cut off if it is not properly |
|
| mounted to the base. |
|
| |
Paper jam. | In case of a paper jam, which may occur if the sheet capacity is | |
| exceeded or if the paper is not put in straight. To clear a jam: | |
| 1. Move the Function Switch (2) to the REV (II) position. | |
|
| The shredder will reverse to clear the jam. |
| 2. If the shredder jams in reverse, move the Function Switch (2) | |
|
| to the AUTO (I) and allow it to run for about 5 seconds. |
| 3. If the jam still does not clear, unplug shredder and carefully | |
|
| grasp the paper and pull out slowly. |
| 4. Once the jam is cleared, plug in and move the Function | |
|
| Switch to AUTO (I) for continued shredding or OFF (O) if |
|
| shredding is complete. |
|
|
|
Shredder squeaks, grinds | - | Check to see if bin is full. If bin is full, follow instructions |
or runs below capacity. |
| under maintenance. |
| - | Oil cutting cylinder. |
|
| |
Shredder continues to run | - No action required. | |
for 2 or 4 seconds after |
| This is a |
shredding has been |
|
|
completed. |
|
|
|
|
|