Desa Tech CSPINT Specifications, Service Hints, Technical Service, Replacement Parts, Accessories

Page 19

SPECIFICATIONS

CSBPT, CSPBPT, CSPIPT

(Includes 111485-01 Burner Chassis)

Btu (Variable)

16,000/30,000

Type Gas

Propane/LP Only

Ignition

Piezo

Pressure Manifold

8" W.C.

Inlet Gas Pressure (in. of water)

Maximum

14"

Minimum*

11"

Shipping Weight

265 lbs.

* For input adjustment

 

CSBNT, CSPBNT, CSPINT

(Includes 111485-02 Burner Chassis)

Btu (Variable)

16,000/30,000

Type Gas

Natural Gas Only

Ignition

Piezo

Pressure Manifold

3.5" W.C.

Inlet Gas Pressure (in. of water)

Maximum

10.5"

Minimum*

5"

Shipping Weight

265 lbs.

* For input adjustment

SERVICE HINTS

When Gas Pressure Is Too Low

pilot will not stay lit

burners will have delayed ignition

heater will not produce specified heat

propane/LP gas supply may be low

You may feel your gas pressure is too low. If so, contact your local propane/LP gas supplier.

TECHNICAL SERVICE

You may have further questions about installation, operation or troubleshooting. If so, contact DESA Heating ProductsʼTechnical Service Department at 1-866-672-6040. When calling, please have your model and serial numbers of your heater ready.

You can also visit DESA Heating Productsʼtechni- cal service web site at www.desatech.com.

REPLACEMENT PARTS

Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty.

PARTS UNDER WARRANTY

Contact authorized dealers of this product. If they canʼt supply original replacement part(s), call DESA Heating Productsʼ Technical Service Department at 1-866-672-6040.

When calling DESA Heating Products, have ready

your name

your address

model and serial numbers of your heater

how heater was malfunctioning

type of gas used (propane/LP or natural gas)

purchase date

Usually, we will ask you to return the part to the factory.

PARTS NOT UNDER WARRANTY

Contact authorized dealers of this product. If they canʼt supply original replacement part(s), either contact your nearest Parts Central (see page 23) or call DESA Heating Products at 1-866-672-6040 for referral information.

When calling DESA Heating Products, have ready

model number of your heater

the replacement part number

ACCESSORIES

Purchase these heater accessories from your local dealer. If they can not supply these accessories, call DESA Heating Products at 1-866-672-6040 for referral information. You can also write to the address listed on the back page of this manual.

EQUIPMENT SHUTOFF VALVE GA5010

For all models. Equipment shutoff valve with 1/8" NPT tap. Fits 1/2" NPT pipe.

CLEANING KIT - CCK (Not Shown)

For all models. Your vent-free gas appliance re- quires regular cleaning and maintenance to prevent performance problems. This kit gives you the tools and instructions to make it easy to clean all critical areas of your appliance.

INFORMATION VIDEO - 108917-01

For all models.Acare and maintenance video is avail- able by calling 1-866-672-6040. You may also email your request to productsupport@desaint.com.

111487-01D

www.desatech.com

19

Image 19
Contents Models CSBNT, CSBPT, CSPBNT, CSPBPT, CSPINT, Cspipt What to do if YOU Smell GASTable of Contents Safety Information Local Codes Product IdentificationProvide adequate clearances around air openings AIR for Combustion Ventilation Product FeaturesVentilation Air From Inside Building Determining FRESH-AIR Flow for Heater LocationVentilation AIR Determining if You Have a Confined or Unconfined SpaceVentilation Air From Outdoors AIR for Combustion Ventilation UnpackingMinimum Wall and Ceiling Clearances see , InstallationCheck GAS Type Clearances to Combustibles Vent-Free Operation OnlyTop View Connecting to GAS SupplyInstallation Items Needed Front ViewBack View Petroleum LP gasCorrect all leaks at once Checking GAS ConnectionsTest Pressures In Excess Of 1/2 Psig 3.5 kPa Test Pressures Equal To or Less Than 1/2 Psig 3.5 kPaWall clearances as outlined on Installing LOG SETInstalling ROD and Screen Stove cavity see FigureOperating Heater For Your Safety Read Before LightingLighting Instructions Inspecting Burners Cleaning MaintenanceReplace logs if broken or chipped dime-sized or larger Burner Injector Holder and Pilot AIR Inlet HoleLogs Blow air into the primary air holes on the injector holder Observed Problem Possible Cause Remedy TroubleshootingDark residue on logs or inside Improper log placement Delayed ignition burnerBurner orifice clogged Clean burner see Cleaning When burner is litStatement at top Gas leak. See WarningReplacement Parts SpecificationsService Hints Technical ServiceIllustrated Parts Breakdown Parts List Stove Body Models CSB SERIES, Cspb Series and Cspi Series Parts Centrals Keep this Warranty Warranty Information
Related manuals
Manual 24 pages 12.15 Kb