JVC XL-Z132BK, XL-Z232BK manual Before Using for the First Time, Installing the unit

Page 9

BEFORE USING FOR THE FIRST TIME

Installing the unit

Best location

Select a location which is level, dry and neither too cold nor too hot (temperature range 5°C (41°F) to 35°C (95°F)). Also, avoid dusty locations or any location subject to vibration.

If interference occurs

If this equipment is placed near a tuner or a radio receiver tuned to AM frequencies, interference may occur. If this happens, we recommend either that you move this unit as far away as possible from the tuner or receiver or briefly turn off the power to this unit.

Connecting to the Digital Output Jack

It is possible to transmit a digital sound signal from this unit directly to a MD recorder,etc.

Notes

ÖNever connect the digital out put cable except to the digital input jack.

ÖAn optical digital cord (optional) is required to make this connection. Refer to the instruction manual of the MD recorder, etc. for details.

ÖThere is a protective cap on the DIGITAL OUT jack (optical) . When making the connection, pull off this cap and store it carefully in a safe place. Should you undo the connection, replace the cap on the jack.

Connecting to the Analog Output Jacks

Connecting to an amplifier or receiver allows you to listen to the sound from the speakers.

Connect the OUTPUT jacks of this unit to the line input jacks of an amplifier or receiver with the supplied audio cord.

Notes

ÖNever connect the OUTPUT jacks to the PHONO jacks of the amplifier or receiver. This may cause damage to the components.

ÖMake sure that the same channels are connected between this unit and the amplifier or receiver: LEFT to LEFT and RIGHT to RIGHT.

ÖDo not connect the power plug unless all connections are com- pleted.

ÖConnect the plugs firmly. Loose connections may cause noise or malfunction.

Rear panel of this unit

DIGITAL OUT

 

OPTICAL

 

OUTPUT

COMPULINK-3

AC IN

SYNCHRO

Amplifier or receiver

Audio cord

OUTPUT

OPTICAL

MD recorder, etc.(optional)

DIGITAL

 

OUT

 

Optical digital cord (optional)

 

DIGITAL OUT

 

OPTICAL

 

OUTPUT

COMPULINK-3

AC IN

SYNCHRO

LEFT

RIGHT

Rear panel of this unit

LEFT

RIGHT

Speaker unit

Page 4

Image 9
Contents XL-Z132BK/XL-Z232BK Mises en garde, précautions et indications diverses HOW to Locate Your JVC Service Center Limited Warranty AUDIO-1 Table of contents Precautions IntroductionAbout this manual Main unit Names of buttonsRemote control unit XL-Z232BK only Installing the unit Before Using for the First TimeConnecting to the Digital Output Jack Connecting to the Analog Output JacksTo connect the AC power cord of the main unit Supplying the powerTo install the batteries in the remote control unit Installing the batteriesBattery replacement Connecting the Compu Link cordRemote control operation XL-Z232BK Only Turning on the power of this unitBasic Operations Basic functions for disc playbackPlaying a disc Locating a point to start playbackSkipping to a desired track Stopping playbackDisplaying the time Searching for a desired sectionSpecifying a desired track Various Playback Patterns Playing tracks in a desired orderPlaying tracks in a random order Playing repeatedly To cancel repeat modeRepeating whole disc Repeating one trackAutomatic power on/off function Compu Link remote control systemGeneral Informations Automatic source selectionMaintenance of discs How to handle CDsCare and handling Even on label sideSpecifications TroubleshootingAccessories General0199AOMOKGJSC