Weider 831.150680 user manual Locknuts 36. Do not tighten the Nylon Locknuts yet

2. Press three 45mm Square Inner Caps (22) into the	2	22
Front Leg (1).				36
Attach the Front Leg (1) to the Frame (2) with two
M10 x 65mm Bolts (47), a Support Plate (16), and				2
two M10 Nylon Locknuts (36). Do not tighten the
Nylon Locknuts yet.
		47		36
			16	1
				22
	22
3. Attach the Frame (2) to the Crossbar (3) with two	3
M10 x 81mm Bolts (35) and two M10 Nylon
Locknuts (36). Do not tighten the Nylon
Locknuts yet.			3	35
		36
		2	36
4. Press four 1” Square Inner Caps (23) into the	4
ends of the Right and Left Backrest Frames (7,
				10
8). Press two 1” x 2” Inner Caps (24) into the
adjustment tubes on the Backrest Frames.				23
Orient the Backrest (10) as shown. Attach the
Backrest to the Right and Left Backrest Frames
(7, 8) with four M6 x 38mm Screws (39) and four
M6 Washers (40). Do not tighten the Screws				8
yet.				40
		7
				39
	23	40		40
		39
		24		39

7