8.Press two 3/4” Round Inner Caps (29) into each Pad Tube (19).
Slide two Pad Tubes (19) through the Leg Lever
(9). Slide the third Pad Tube through the holes in the Front Leg (1).
Slide two Foam Pads (20) onto the ends of each Pad Tube (19).
9.Attach the Curl Pad (13) to the Curl Post (12) with two M6 x 16mm Screws (37).
10.Make sure that all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUST- MENTS, beginning on page 10.
8 |
|
20 |
|
1 |
|
9 |
|
| 29 |
19 | 29 |
20 |
|
29 |
|
19 | 20 |
| |
9 |
|
13 |
|
37 |
|
37 |
|
12 |
|
9