Weider 831.15707.0 Attach the other end of the Crossbar 2 in the same way, Locknut or Screw yet

Page 7

2.Attach one end of the Crossbar (2) to two Joint Plates (11, 35) with two M10 x 66mm Bolts (28) and two M10 Nylon Locknuts (31). Do not tight- en the Nylon Locknuts yet.

Attach the other end of the Crossbar (2) in the same way.

3.Attach the Front Leg (4) to the Bench Frame (3) with an M10 x 19mm Screw (5), an M10 x 66mm Bolt (28), an M10 Washer (30), and an M10 Nylon Locknut (31). Do not tighten the Nylon

Locknut or Screw yet.

4.Attach the Bench Frame (3) to the Crossbar (2) with two M10 x 68mm Bolts (27) and two M10 Nylon Locknuts (31). Do not tighten the Nylon

Locknuts yet.

7

2

 

31

 

35

 

11

 

28

 

2

 

3

 

5

 

 

3

28

 

31

 

30

 

4

 

4

 

2

27

3

 

 

31

Image 7
Contents Sears, Roebuck and Co., Hoffman Estates, IL Model No Serial NoTable of Contents Important Precautions Before YOU Begin Part Identification Chart Make Assembly Easier AssemblyLocknut or Screw yet Attach the other end of the Crossbar 2 in the same wayLocknuts yet Same height Repeat this step with the other Pad TubeHoles Tube Lubricate Adjusting the Backrest AdjustmentToning Weight LossExercise Guidelines Muscle BuildingCooling Down Page Qty Description Part LIST-Model NoR0407A Get it fixed, at your home or ours DAY Full Warranty