PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been
M10 Nylon Locknut (71)
1/2" Nylon Locknut (78)
M12 x 58mm Button Bolt (81)
M12 x 62mm Button Bolt (80)
3/8” Lock Washer (74) | 5/16" Washer (76) | 3/8” x 2 1/2” Button Bolt (96) |
| ||
| M12 Nylon Locknut (72) |
|
|
| 3/8” x 2 1/2” Bolt (94) |
#8 x 1/2” Screw (82) |
|
|
| 3/8” Nylon Locknut (73) | 3/8” x 2 3/4” Bolt (93) |
| 3/8" SAE | |
|
| |
#8 x 3/4” Screw (104) | Washer (75) |
|
|
| 3/8” x 3” Bolt (87) |
| 3/8” Nylon Jamnut (92) |
|
3/8” x 1” Screw (100) |
| 3/8” x 2 3/4” Carriage Bolt (88) |
|
|
5/16” Nylon Locknut (107)
3/8” x 1 1/2” Tension Screw (106)
1/2” x 3” Carriage Bolt (79)
M8 Flange Nut (47)
3/8” x 1 3/4” Button Bolt (25) 
3/8” x 3 1/2” Bolt (90)
3/8” x 2 1/4” Screw (85)
3/8” x 2” Carriage Bolt (91)
3/8” x 4” Bolt (86) 
M8 x 114mm Axle (102)
3/8” x 6” Bolt (83) 