Weider WEBE14080 user manual

11.	Press two 3/8” Plastic Sleeves (37) into the “H”-	11
	Frame (1) as shown.
				43
	Lubricate a 3/8” x 5” Bolt (8). Insert the Bolt through
	the hole in the indicated Fly Arm (42). Slide a 3/8”			9
	Washer (9) onto the Bolt. Insert the Bolt through the			37
	“H”-Frame and the Plastic Sleeves (37). Make sure
	that the 1/2” x 3” Plastic Spacer (36) is resting	8	9	1
	against the outside of the “H”-Frame. Slide
	another 3/8” Washer onto the Bolt and tighten a
	3/8” Nylon Locknut (43) onto it.
	Repeat this step to assemble the other Fly Arm (not	42	36
	shown).
12.	Attach a 9” Pad Tube (40) to one of the Fly Arms	12
	(42) with a 1/4” x 2” Screw (33) and a 1/4” Nylon
	Locknut (28). Slide a Foam Pad (23) onto the Pad
	Tube.			33
	Press a 3/4” Round Inner Cap (26) into the indicat-
	ed end of the 9” Pad Tube (40).		42
	Repeat this step to assemble the other Fly Arm (not			28
	shown).
			40
		26	23

9