Weider WEBE15420 user manual Assembly, Make Things Easier for Yourself

Page 6

ASSEMBLY

Make Things Easier for Yourself

Everything in this manual is designed to ensure that the weight bench can be assembled suc- cessfully by anyone. However, it is important to realize that the versatile weight bench has many parts and that the assembly process will take time. Most people find that by setting aside plen- ty of time, assembly will go smoothly.

Before beginning assembly, carefully read the following information and instructions:

Assembly requires two people.

Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Tighten all parts as you assemble them, unless instructed to do otherwise.

As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.

For help identifying small parts, use the PART IDENTIFICATION CHART on page 5.

The following tools (not included) are required for assembly:

• Two adjustable wrenches

• One rubber mallet

• One standard screwdriver

• One Phillips screwdriver

Lubricant, such as grease or petroleum jelly, and soapy water.

Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches.

1.Before assembling the weight bench, make sure that you have read and understand the informa- tion in the box above.

Press a 50mm Square Inner Cap (24) into the end of the Bench Frame (1).

Attach the Bench Frame (1) to the Front Leg (2) using two M8 x 60mm Bolts (30), two M8 Washers (10), and two M8 Nylon Locknuts (25).

2.Insert a 50mm Square Inner Cap (24) into the Left Base (3). Attach the Left Base to the Bench Frame

(1) using an M8 x 58mm Carriage Bolt (36), an M8 x 68mm Bolt (22), and two M8 Nylon Locknuts (25).

Attach the Right Base (35) in the same manner.

Attach the Left Upright (4) to the Left Base (3) with two M8 x 58mm Carriage Bolts (36) and two M8 Nylon Locknuts (25). Attach the Right Upright (5) to the Right Base (35) in the same manner.

1

 

 

1

24

 

 

 

 

 

25

 

 

 

 

 

 

10

 

 

 

 

 

 

25

 

30

10

2

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

5

 

 

 

 

 

 

24

 

 

35

 

 

4

 

 

 

 

1

 

 

 

25

 

 

 

 

 

 

25

 

24

 

 

 

 

 

 

 

 

3

 

22

 

 

36

 

36

 

 

6

Image 6
Contents QUESTIONS? Model No. WEBE15420 Serial NoCustomer HOT Line Table of Contents Important Precautions Before YOU Begin Right SideLeft Side Part Identification Chart Assembly Make Things Easier for YourselfAttach the Right Base 35 in the same manner Weight Rests should be set at the same height Locknut the Leg Lever must be able to pivot freelyPage Bracket Folding the Backrest AdjustmentsAdjusting the Backrest Attaching the LAT BARAttaching Weights to the LEG Lever Adjusting the Weight RestsAttaching the Curl Post Exercise Guidelines Muscle Chart Cooling DownStaying Motivated Part LIST-Model No. WEBE15420 Qty DescriptionExploded DRAWING-Model No. WEBE15420 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT