JVC CA-MXDVA9 Connecting Speakers, Turn the AM loop antenna until you have the best reception

Page 10

AM antenna

 

ANTENNA

Vinyl-covered wire

 

 

 

 

(not supplied)

1

AM EXT

 

 

 

 

AM LOOP

 

 

FM 75

 

 

COAXIAL

 

2

 

 

 

AM loop antenna

 

 

(supplied)

 

1Connect the AM loop antenna to the AM

LOOP terminals as illustrated.

• If the AM loop antenna wire is covered with vinyl, remove the vinyl by twisting it as shown in the diagram.

2Turn the AM loop antenna until you have the best reception.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. The AM loop antenna must remain connected.

For better reception of both FM and AM

Make sure the antenna conductors do not touch any other terminals and connecting cords.

Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

Connecting Speakers

IMPORTANT: Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

To connect main speakers and front subwoofers

1

 

3

 

2

 

 

Red

 

Speaker cords

FRONT

Speaker cords

(red/black)

(red/black)

SUBWOOFERS

RIGHT

LEFT

 

Black

 

Black

 

 

RIGHT

LEFT

 

 

MAIN

 

 

SPEAKERS

 

CAUTION: SPEAKER IMPEDANCE

6 16

Blue

Speaker cords

(blue/black)

Right front speaker

Left front speaker

When using front multi speaker system, refer to

“Recommended Main Speakers and Subwoofers Layout” separately attached.

1Open the speaker terminal.

2Insert the end of the speaker cord into the

terminal.

Match the polarity (colors) of the speaker terminals: Red

(+)to red (+) and black (–) to black (–); Blue (+) to blue

(+)and black (–) to black (–).

3Close the speaker terminal.

– 7 –

Image 10
Contents CA-MXDVB10 / CA-MXDVB9 CA-MXDVA9 Page Class Laser Product Important for Laser ProductsIntroduction PrecautionsAbout This Manual Contents Front Panel Location of the Buttons and ControlsFront Panel Become familiar with the buttons and controls on your unitDisplay Window See pages in the parentheses for detailsFM/AM button 12 Remote ControlRemote Control AUX buttonConnecting Antennas Supplied AccessoriesGetting Started Turn the AM loop antenna until you have the best reception Connecting SpeakersClose the speaker terminal To connect a subwoofer Connecting Other EquipmentTo connect a center speaker and rear speakers To connect an analog componentAbout sounds output through the rear terminals Through the Optical Digital Output terminalOn the unit only Canceling the Display DemonstrationAdjusting the Voltage Selector To connect a TVSetting the AM Tuner Interval Spacing Turning On or Off the PowerSetting the Clock Common OperationsSelecting the Sources Press Level + or to adjust the front speaker output balanceTo turn down the volume level temporarily To listen to the FM/AM broadcasts, press FM/AM. SeeSEA Sound Effect Amplifier modes Reinforcing the Bass SoundSelecting the Sound Modes Manual modes Manual 1/2/3Creating Your Own Sound Modes Manual ModeOn the unit only Select one of the preset sound modes Press SET againTuning into a Preset Station Tuning into a StationPresetting Stations Listening to FM and AM BroadcastsPlaying Back Discs-Introduction If appears on the screen when pressing a buttonDisc cannot accept an operation you have tried to do Selecting the Multi-Angle View DVD FeaturesDisc Structure SVCD, VCD and CDSelecting the Audio Language or Sound Selecting the SubtitleCommon Basic Disc Operations Basic Disc PlaybackLoading Discs DVD PlaybackTo use Time Search and Chapter Search on the TV screen To show the on-screen indicationTo use Time Search on the TV screen SVCD/VCD/CD PlaybackTo go to another track Press Control + or − to move to Time SEARCH, then pressForward Search Searching for a Particular PointProhibiting Disc Ejection-Tray Lock Reverse SearchOn the remote control only Press Menu or Title Menu OperationsLoad discs To check the programed contentsSelecting Playback Modes To modify the programPress Control + or − to On the remote control Load discsPress Play Mode Move to ProgramPlaying at Random-Random Play Repeating Playback Repeat PlayOn the unit Press Repeat before or during play On the remote control onlyRepeat Press Control + or − to move to A-B RepeatSlow Motion Playback-Slow DVD/SVCD/VCD Special Effect PlaybackStill Picture/Frame-by-Frame Playback Viewing Continuous Still Pictures-StrobePress Select or Enter To cancel the function, select Theater OFFSelecting the Picture Brightness Theater Position Theater position indication Appears on the TV screenPlaying Back a Tape Playing Back TapesLocating the Beginning of a Song Music Scan You can use the DSP Surround mode for any source you like Activating and Adjusting the DSP Surround ModePress DSP Surround or to select a desired DSP Surround mode To cancel the DSP Surround mode, select OFF so thatOn the unit only Press Eject 0 for the deck B RecordingRecording a Tape on Deck B Check the tape direction of deck BPress Dubbing Dubbing TapesSVCD/VCD/CD Direct Recording You can record from one tape to anotherAuto Edit Recording To cancel Auto Edit RecordingPress CANCEL/DEMO or 7 before or after recording To change the tape length manuallySinging along Karaoke Using the MicrophonesPress Echo while holding Down Shift No background sound will be heard Microphone mixingTo use microphone only If the playing disc is a multiplex Karaoke discTo 12 steps Reserving Karaoke Songs Karaoke Program PlayPress V. Mask while Holding down Shift Karaoke reserve screen appears onPress Cursor 3 or 2 to select a proper setting you want Basic ProcedureOn the remote control only Press Choice Operating the On-Screen MenuChanging the Initial Language Settings Changing the Various Audio SettingsDisplay Expert Speaker Setting menu More about Speaker SettingExpert adjustment procedure SUB WOOFER-LEVELMonitor Type Changing the Display SettingsPress Cursor 3 or 2 to adjust the output level, then Screen SaverAV Compulink Mode Changing the System SettingsOn System menu, you can change the following settings Auto StandbyUnlocking the Parental Lock Temporarily Using the Parental LockSetting the Parental Lock Level Press EnterPress CLOCK/TIMER again Using the TimersUsing Daily Timer How Daily Timer actually worksWhen selecting Disc If you have set the Daily Timer With the unit turned onWhen selecting Tuner FM or Tuner AM Turn 4 / ¢ to set the volume levelHow Recording Timer actually works Using Recording TimerSelect the preset station If necessaryOn the remote control only Press Sleep Using Sleep TimerTimer Priority Wait for about 5 seconds after specifying the time lengthAV Compu Link Connection Using AV Compu Link Control SystemAutomatic power on/off Available operationsHandling discs Cleaning the unitTo clean the disc Handling cassette tapesAppendix B-Troubleshooting Playback disc Output SignalsVideo CD, Audio CD Audio CD with DTS Digital Surround Appendix E-Language Code for On-Screen Menu Appendix F-Country Code for Parental Lock Page Appendix G-Glossary Specifications 230V 240V SP-MXDVB9 =gs`= Altavoz Para Combinación A/V Speaker for A/V CombinationAltifalantes Para Combinação A/V Specifications ConnectionEspecificaciones ConexiónLigação Especificaçõesرﺎﻌﺷإ نود ﺮﻴﻴﻐﺘﻠﻟ ﺔﺿﺮﻋ تﺎﻔﺻاﻮﳌاو ﻢﻴﻤﺼﺘﻟا Como Instalar LOS Altavoces DE Entorno HOW to Install Surround SpeakersAltavoz Para Combinacion A/V Maneira DE Instalar OS Altifalantes DE SOM Envolventeﺔﻄﻴﶈا ﺔﻋﺎﻤﺴﻟا Especificaçães EspecificaçãesSP-DSC99TN SP-DSS99TNPage EN. SP. PR. CH. AR 0501JYMPRIJEM
Related manuals
Manual 72 pages 12.94 Kb

CA-MXDVA9 specifications

The JVC CA-MXDVA9 and CA-MXDVB10 are compact audio systems that offer an impressive combination of features and technologies designed for music enthusiasts and casual listeners alike. These systems are notable for their sleek design and user-friendly interfaces, making them an excellent addition to any home or office environment.

One of the standout features of the JVC CA-MXDVA9 and CA-MXDVB10 is their multi-format playback capabilities. Both systems support a range of audio formats, including CD, MP3, and WMA, providing flexibility for users to enjoy their favorite music from various sources. Additionally, the systems come equipped with USB ports that allow for direct playback from USB flash drives, enhancing convenience and accessibility.

The CA-MXDVA9 and CA-MXDVB10 also boast advanced sound technologies. The systems utilize JVC’s proprietary digital sound enhancement technology, which elevates audio quality by processing sound in real-time to deliver clearer highs and deeper lows. This ensures that users experience rich, immersive sound whether they're listening to music, watching movies, or playing video games.

Connectivity is another strong point for these audio systems. Both models feature built-in Bluetooth technology, enabling users to stream music wirelessly from their smartphones, tablets, or laptops. This wireless capability ensures an effortless listening experience without the hassle of cables. Additionally, the auxiliary input allows for connecting various devices, making it versatile for different media players.

The design of the JVC CA-MXDVA9 and CA-MXDVB10 is sleek and modern, making them aesthetically pleasing while also being functional. They are compact in size, making them easy to fit into any space without compromising on sound quality. The front-panel display is intuitive, allowing users to navigate through their music library with ease.

Moreover, the systems come with a built-in FM/AM tuner, providing access to local radio stations. The ability to preset favorite stations ensures that users can quickly access their preferred channels.

In conclusion, the JVC CA-MXDVA9 and CA-MXDVB10 are dynamic compact audio systems that cater to a wide array of audio needs. With their multi-format playback, advanced sound processing technologies, and Bluetooth connectivity, they represent an excellent choice for those looking to enhance their audio experience. Their stylish design and practical features make them a valuable addition to any audio setup.