Weider WEBE19300 manual Tighten the M8 x 16mm Screws 50 used in steps 6

Page 8

6.Press a 38mm Bushing (29) into each end of the Right Weight Glider (31). Slide the Right Weight Glider onto the indicated end of the Barbell (35) and attach it to the Barbell using an M8 x 16mm Screw (50). Do not tighten the Screw yet. Make sure the Right Weight Glider is oriented exactly as shown.

7.Press a 38mm Bushing (29) into each end of the Left Weight Glider (32). Slide the Left Weight Glider onto the indicated end of the Barbell (35) and secure it to the Barbell using an M8 x 16mm Screw (50). Do not tighten the Screw yet. Make sure the Left Weight Glider is oriented exactly as shown.

8.Press a 50mm Bushing (47) into the indicated end of a Weight Adapter (33). Slide the Weight Adapter onto the Barbell (35) and secure it to the Barbell using a Large Washer (44) and an M10 x 25mm Bolt (43).

Attach the other Weight Adapter (33) to the other end of the Barbell (35) in the same manner.

Tighten the M8 x 16mm Screws (50) used in steps 6 and 7.

9.Note: This step requires the help of a second person.

Slide the Right Safety Spotter (23) and the Left Safety Spotter (24) onto the Weight Guides (18).

Make sure the Safety Spotters are oriented exactly as shown.

Slide the assembled Locking Bar (34) and the Right and Left Weight Gliders (31, 32) onto the Weight Guides (18). Make sure the Locking Bar and

Weight Gliders are oriented exactly as shown.

8

6

 

 

 

50

 

29

 

 

31

29

 

 

 

 

35

 

7

 

 

 

35

 

 

29

32

 

 

 

 

50

 

 

29

8

 

 

 

35

 

 

33

 

 

 

47

 

 

44

 

 

43

9

 

 

31

34

 

 

 

23

 

 

 

32

 

18

24

 

 

18

 

Image 8
Contents Mon.ÐFri., 6 a.m.Ð6 p.m. MST Model No. WEBE19300 Serial NoCustomer HOT Line Table of Contents Important Precautions ¥ Misuse of this product may result in serious injuryLeft Side Before You BeginRight Side Part Identification ChartÑModel No. WEBE19300 R0800B Locknuts yet AssemblySome small parts may be pre-assembled Page Tighten the M8 x 16mm Screws 50 used in steps 6 Make sure the Safety Spotters are oriented exactly as shownWeight Gliders are oriented exactly as shown Locknuts 11. Do not tighten the Nylon Locknuts Yet Do not tighten the Nylon Locknuts yetTighten all Nylon Locknuts used in steps 1 through Locknut. The Pulley must be able to turn freelyNylon Locknut the Pulley must be able to turn freely Using the Locking BAR Adjusting the Weight RackUsing the Weight Adapter Using the Safety Spotters Attaching Weights to the Barbell or the Weight CarriageTightening the Cables Pulley must be able to turn freelyExercise Guidelines Staying Motivated Muscle ChartCooling Down Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty Remove this Part LIST/EXPLODED Drawing From the Manual Part ListÑModel No. WEBE19300 Qty DescriptionExploded DrawingÑModel No. WEBE19300