Weider WESY19002 user manual ARM Assembly

Page 11

ARM ASSEMBLY

11.Attach the Seat Plate (37) to the Seat Frame (36) using a 1/4” x 2 1/4” Carriage Bolt (38), a 1/4” Flat Washer (78), and a 1/4” Nylon Locknut (2).

12.Attach a Bumper (11) to the Seat Frame (36) using a #10 x 1” Screw (80).

13.Attach the Seat Frame (36) to the Front Upright (42) using two 3/8” x 3 1/4” Bolts (8), a Back Plate (71), and two 3/8” Nylon Locknuts (21).

14.Press a 1 1/2” Square Inner Cap (32) into each end of the Leg Lever (29) and the indi- cated end of the Seat Frame (36).

Lubricate a 5/16” x 2 1/2” Bolt (22). Attach the Leg Lever (29) to the Seat Frame (36) using the Bolt and a 5/16” Nylon Locknut (3).Do not overtighten the Nylon Locknut; the Leg Lever must be able to pivot freely.

11

11
		38
	36		37
	36
			78
			2
12
	36
		11	80
			80
13
		42
8
71
			21
			36
14
32
		36
			22
			32
3			29
			29
			32

Image 11

Contents Model No. WESY19002 Serial No QUESTIONS?Table of Contents Important Precautions Before YOU Begin Part Identification Chart Page Make Assembly Easier for Yourself AssemblyNylon Locknuts yet Frame AssemblyBase is oriented exactly as shown Locknuts yet Tighten all Nylon Locknuts used in steps 3 through Frame Assembly ARM AssemblyARM Assembly Be able to turn freely ARM Assembly Cable AssemblyIndicated bracket on the Top Frame Tighten the Nylon Locknut the Pulley mustLocknut the Pulley Bracket must be able to pivot freely Nylon Locknut yet Locknut the Pulley must be able to turn freelyEn the Nylon Locknut the Pulley must be Able to turn freely Seat Assembly TROUBLE-SHOOTING and Maintenance on Changing the Weight Setting AdjustmentWeight Resistance Chart Tightening the Cables TROUBLE-SHOOTING and MaintenanceCable Diagram Key No. Qty Description Part LIST-Model No. WESY19002R0303A Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty