SEAT ASSEMBLY
31.Attach the Seat (13) to the Seat Frame (36) using two 1/4” x 3/4” Bolts (18), a 1/4” x 2 1/4” Bolt (33), and a 1/4” Washer (78).
32.Attach the Backrest (41) to the Front Upright (42) using two 1/4” x 3” Bolts (43) and two 1/4” Washers (78).
33.Insert the four 3/4” Round Inner Caps (34) into the ends of the two Pad Tubes (28). Slide the Pad Tubes into the holes in the Leg Lever (29) and the Seat Frame (36). Slide the four Foam Pads (30) onto the ends of the Pad Tubes.
34.Attach the Curl Pad (24) to the Curl Post (35) with two 1/4” x 3/4” Bolts (18).
To attach the Curl Post (35) to the training system, remove the 1 1/2” Square Inner Cap
(32)from the Seat Frame (36). Insert the Curl Post into the Seat Frame and tighten the Knob (51) into the Seat Frame and the Curl Post.
Note: When the Curl Post (35) is not in use, replace the 1 1/2” Square Inner Cap (32).
16
31 |
|
|
|
|
| 13 |
|
| 36 |
|
|
| 78 |
|
|
| 33 |
|
|
|
| 18 |
|
32 | 43 | 42 |
|
|
| ||
| 78 |
|
|
| 43 |
|
|
| 78 |
| 41 |
33 | 36 | 30 |
|
|
|
| |
|
| 28 |
|
| 30 | 29 | 34 |
|
| ||
| 30 |
|
|
34 |
|
|
|
34 |
|
|
|
|
| 24 |
|
| 32 |
|
|
| 18 |
|
|
51 |
| 35 |
|
|
|
| |
| 36 |
|
|